Firing order of 99 eclipse sparkplug wire placement

The 4G64 (2.4L) engine is an in-line four cylinder engine. The cylinder numbers are assigned as 1-2-3-4 from the front of the engine (timing belt side). This engine is fired in the order of the 1, 3, 4 and 2 cylinders.
Feb. 27, 2009

Spark Plug Order ' Mitsubishi Eclipse 3G Club

Pictures

https://www.google.com/search?q=firing+order+for+2007+Mitsubishi+Eclipse+Spyder+2.4L

Strictly speaking you have two fuel / air sensors in the manifold for the catalytic converter and two O2 sensors after the cat.

Details here

https://www.google.com/search?q=2007+Mitsubishi+Eclipse+Spyder+2.4L+Replace+o2+sensor

buy original equipment manufacturer sensors (OEM). Their job is important to engine management.
..

hI,THEIR ARE TWO TYPES OF ENGINES FOR YOUR CAR,HERE'S A LINK TO THE 2.4 ENGINE FIRING ORDER. Specifications Firing Order AutoZone com HERE'S A LINK TO THE 3.0 FIRING ORDER. Specifications Firing Order AutoZone com WHEN CHANGING SPARK PLUGS AND WIRES,DO ONE AT A TIME SO YOU WANT GET THEM CROSSED UP.

Never seen firing order of123456.
You should be able to find firing order with web search.

Get a chiltons manual and look up firing order.

FIRING ORDERS

Before carrying out extensive tests to isolate poor running problems, check connections of spark plug wires. This is especially important if plugs, wires, distributor, etc., have been disturbed recently for service. Obviously, this is not applicable to the wireless 4.7L engine.

NOTE To avoid problems, remove and tag the spark plug wires one at a time to ease reinstallation.
For vehicles with an extensive service history, keep in mind that the distributor could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason, it is very important that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired.

Fig. 2.5L Engine Firing Order: 1-3-4-2 Distributor Rotation: Clockwise

Fig. 3.9L Engine Firing Order: 1-6-5-4-3-2 Distributor Rotation: Clockwise

Fig. 5.2L and 5.9L Engines Firing Order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

Fig. 4.7L Engine Firing Order: 1-8-4-3-6-5-7-2 Distributorless Ignition

Fig. 8.0L Engine Firing Order: 1-10-9-4-3-6-5-8-7-2- Distributorless Ignition
Back to Top

FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 1991-94 2.9L and 3.0L Engines Firing order: 1-4-2-5-3-6 Distributor rotation: Clockwise
Fig. 2: 2.3L, 2.5L Engines Firing order: 1-3-4-2 Distributorless ignition
Fig. 3: 1995-99 3.0L Engines Firing order: 1-4-2-5-3-6 Distributorless ignition
Fig. 4: 4.0L Engines Firing order: 1-4-2-5-3-6 Distributorless ignition
Fig. 5: 1996-99 5.0L Engines Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition

Firing order: 1-5-3-6-2-4 distributor rotation: counterclockwise. ...

For the 3.0L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.....(back)
1.......3......5
2.......4......6
....(front)
Distributor:
...(back)
4....5....6
o....o....o
/////////////
\\\\\\\\\\\\\
o....o....o
3....2....1
..(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

First you need to determin witch one is #1 on cap Witch usely is the one directly behind carb. or throutle body. than its perty strate forward from there rotor runs clockwise. Cap only goes on one way. Food for thought when you chg. cap or wires one at a time is the rule even for a seasoned mechanic.

1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6 1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6
4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System