Is there a adjustment on 5 speed manual transmission cluthch
SOURCE: manual 5 speed transmission 1989 ford ranger
Try to see past the slave hose and bleeder to see if you can see the slave work. Could it be stuck in the depressed position? Have a helper push the pedal while you watch. I think your tranny is broke.
SOURCE: 96 escort manual 5 speed stuck in reverse
Is the stick moving? or is it 'stuck' in the reverse position as well? There are adjustments but it seems more likely that your 'stick' has come unstuck from the gear levers that actually put the gears in the right spot. Have someone look at the transmission while you move the stick to see if the levers are moving and put your response here.
SOURCE: how to change transmission oil on a 1993 ford f250
Fluid - M/T: Fluid Type Specifications
The manual transmission models M50D; Borg-Warner T-18 and ZF model S5-42 each use Motorcraft MERCON© Multi-Purpose Automatic
Transmission Fluid XT-2-QDX or DDX (ESP-M2C166-H) or equivalent.
There should be a drain plug near the bottom of the transmission, the plug should be removed by inserting a 3/8" ratchet in the hole on the plug. Drain the oil.
There should be a similar plug higher on the transmission case, remove this and fill from there.
SOURCE: 1992 Ford F250. The clutch pedal will not release
you need to blead out the clutch cylinder,same as brakes get someone to pump the clutch pedal up and down and then hold the peddle down and crack the bleader screw on the clutch slave cylinder.do this until all the air is out .If this does not work then you need to replace the clutch.
SOURCE: what kind of transmission fluid for 2003 ford
DONT USE GEAR OIL IN A MANUAL TRANSMISSION. it will blow your seals out. the gear oil is too heavy and will block passages in the tranny
281 views
Usually answered in minutes!
×