2007 Chevrolet Colorado Logo

Related Topics:

A
Anonymous Posted on Sep 26, 2014

Where is the thermastat housing vent for a 2007 chevy colorado

2 Related Answers

Anonymous

  • 91 Answers
  • Posted on Feb 22, 2010

SOURCE: How to remove the car stereo from 2007 Chevy Colorado

This is not hard but tricky because the trim plate around the radio has clips that hold the trim plate very tight.Use a plastic type flat tool or flat screw driver wraped with tape or a shop rag to avoid damage to the plastic trim and pry the trim panel around the radio loose. remove all elec connectors.Then remove the screws that hold the radio in place and remove all elec connectors.

Ad

Jonah Oneal

  • 14092 Answers
  • Posted on Dec 03, 2010

SOURCE: I have a chevy colorado 2007. The "serv tpm" light

TPM THAT MEANS TEMPOMAT CRUISE CONTROL.CHECK TO SEE IF BRAKE LIGHTS WORK.IF NO CHECK BRAKE LIGHT SWITCH FUSE. IF FUSE OKAY BRAKE LIGHT SWITCH FAULTY OR YOU HAVE OPEN WIRE FROM BRAKE SWITCH TO FUSE BOX.SEE YOUR BRAKE SWITCH DEACTIVATES THE CRUISE CONTROL SYSTEM.PROBLEMS WITH BRAKE PEDAL POSITION SWITCH WILL SET OFF CRUISE CONTROL WARNING LIGHT.IF BRAKE SWITCH OKAY.THE DEALERSHIP HAS TO DIAGNOSIS AND FIX PROBLEM.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

Were is the Body Module Control (BMC) located on my 2007 chevy colorado?

no body size told, extended cab or ????
ext cab is
BCM should be located on passenger side kick panel (under glove box to the right). You have to remove a panel.
2007 service manual remove it page, clear as day
2007-undefined-undefined-0.jpg
2helpful
2answers

Please help. We have a 2007 Chevy Colorado and we have codes P0443, P0455, P0446, and P0128. We are thinking about replacing thermostat, purge control circuit, and vent control circuit per the codes. But-...

First......clear those codes and see if they return before doing anything.Purge valve is on the vent line from tank to engine ,usually in the engine compartment,and vent valve is on the line from tank to outside air,usually by the fuel tank.Don't change any parts until you check them and their circuits with a good scan tool.
0helpful
1answer

Why is the Blower motor blowing sand like material out of the air vents?

About 13,900 results (0.77 seconds) Search Results

    [PDF]Owners Manual - Chevrolet

    https://www.chevrolet.com/.../Chevrolet/.../2008_chevrolet_color... Chevrolet1. 2008 Chevrolet Colorado Owner Manual M ..... belt out all the way, you may engage the child ...... Remove any additional material from the seat such as ......lowered or raised, because the vehicle may blow a fuse. ..... ice, or sand without damaging your transmission, ...... H(Vent): Select this mode to direct air to the.

    [PDF]2016 Chevy Colorado Owner's Manual - Chevrolet

    https://www.chevrolet.com/.../Chevrolet/.../2016-colorado-owners... ChevroletAir Vents 0 189. 2. ..... These systems control the heating, cooling, and ventilation. Climate Control ... shift into and out of the different ...... Q: If my vehicle has airbags, why .... Like all occupants, they are more likely to be seriously injured if they do not...... moving to avoid getting stuck. Traction changes when driving on sand.

    [PDF]2015 Chevrolet Colorado Owner's Manual

    https://www.chevrolet.com/.../Chevrolet/.../2015-colorado-owners... ChevroletNov 19, 2014 - Chevrolet Colorado Owner Manual (GMNA-Localizing-U.S./Canada- ...... sand, mud, or snow, and while .... stop as soon as possible and inflate ....unintentionally moving the key out ...... Like all occupants, they are more likely to be seriously injured if they do not ...... Air vents blow warm air on the side.
0helpful
2answers
0helpful
1answer

How to change the thermastat on a 2004 colorado 3.5

MAKE SURE THE TRUCK IS COLD FOLLOW THE RADIATOR HOSE ON THE RIGHT TO THE THERMOSTAT REMOVE THE HOUSING REMOVE OLD ONE CLEAN OLD GASKET AND REPLACE WITH NEW ONE
0helpful
1answer

2007 chevy colorado DTC code P2610

BEFORE ANY THING. CK YOUR CABLES TO THE PCM. TAKE THEM OUT AND PUT THEM BACK IN. ALSO, MAKE SURE MASS AIR FLOW CONNECTIONS ARE TIGHT.
1helpful
1answer

How to remove the car stereo from 2007 Chevy Colorado

This is not hard but tricky because the trim plate around the radio has clips that hold the trim plate very tight.Use a plastic type flat tool or flat screw driver wraped with tape or a shop rag to avoid damage to the plastic trim and pry the trim panel around the radio loose. remove all elec connectors.Then remove the screws that hold the radio in place and remove all elec connectors.
1helpful
1answer

Isuzu I-290 parts from a Chevrolet Colorado or GMC Canyon

the canyon and colorado are built on the same chassis as yours so i believe that they should be able to interchange
4helpful
2answers

Brake Lights are not working on 2007 Chevy Colorado

Both my rear brake lights went out at the same time. o7 chevy colorado. What are my options?
1helpful
1answer

Engine specs

you can usually find those specs at a local repair shop,or your local Chevy dealer.also some auto parts stores
Not finding what you are looking for?

24 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...