1998 Chevy blazer, lost most of brake peddle and found brake line rusted out over rear axle / repaired and not able to bleed rear brakes. Tested at master cly OK, but not bleeding out of ABS unit? How do I reset this?
SOURCE: 1999 Chevy S10 Blazer 4x4. Replacing rear pad's,& Bleeding Breaks
have one person in the blazer pumping the brake pedal and then hold to the floor, crack the bleeder then tighten, release pedal, repeat till all air is out one side at a time, if this does not work then your ABS unit is bad witch if u follow your lines from your master cylinder u will find a black box with a motor on it, or the master cylinder itself is bad, it also can cause u to have no pedal, replace the master cylinder first, most likely cheaper.
433 views
Usually answered in minutes!
×