2010 Cadillac DTS Logo

Related Topics:

A
Anonymous Posted on Sep 23, 2014
Be the first to answer

<!-- from fixya rte -->Stablitrack need service is being displayed - 2010 Cadillac DTS

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do you service the stabilitrac
The solution to the 'stablitrack alarm and check engine alarm' may not make sense, at least it didn't make sense to me. I found one solution that indicated there was trouble with the EGR ( exhaust gas recircultor ) sensor was not functioning. I replaced it for about $80 bucks and 30 mins. I reset the alarms and my problem was
fixed so far anyway.
Read full answer
Aug 25, 2014 • 2008 Chevrolet Equinox
tip

Volkswagen Service light 1993-99
Beetle,
Golf,
Jetta,
GTI,
Cabrio

1993-99

Note: the Service Reminder Indicator displays 3 messages: OEL, IN 01, and IN 02. These display to alert the driver to follow the items listed under the manufacturer's service interval.

To reset the message displays, turn the ignition switch on. Press and hold the odometer reset button "A" located below the speedometer. Turn off the ignition while holding the button. "OEL" will display on the indicator. Press and hold the lower digital clock reset button "B" until five dashes appear in the display. If needed, press the odometer reset button until "IN 01" appears and then press the clock reset button until five dashes appear. If needed, press the odometer reset button until "IN 02" is displayed and then press the clock reset button until five dashes appear.

To exit reset mode, turn the ignition switch on and when "IN 01" appears, turn the ignition switch off.

Read full tip
on Dec 07, 2009 • Volkswagen Jetta Cars & Trucks
1helpful
1answer

What does it mean when the Stabiliytack Off message is displayed and what do i need to do to fix it.
this gm s stability control for vehicles their are sensors and controller --what it does is acts like your abs system it keeps vehicle on path if going into a corner to fast will sense it and apply enough brake to slow so wont slide or excessive roll in vehicle ---problems can be a stablitrack sensor--abs sensor-- bad hub---bad suspension part--out of alignment these can cause a check light ----you probably wont feel any difference in you ride
Read full answer
May 14, 2014 • 2008 GMC Envoy
0helpful
1answer

Stablitrack warning light repairs
Have to get the codes, like all vehicle issues
for the past 30 years

Same routine every time

Can't diagnose the unknown & you do have a
dash light on.

Most likely a wheel speed sensor
Read full answer
Aug 28, 2013 • Cars & Trucks
3helpful
1answer

Need to reset the button for the mileage the perform service keeps coming on
The shop service manual is rather vague on this subject.
It says that you must select "Service Interval" and once in the service interval display, the interval can be changed by pressing the "Step" button.
The "Reset (Yes/No)" display only becomes available when the service interval is changed.
It doesn't explain where these buttons or the display is located.

This proceedure is probably better explained in the Owner's Manual.
Read full answer
Nov 28, 2010 • 2005 Jeep Liberty
0helpful
1answer

I need to reset the b service on my clk550. How
1.- Insert key into ignition, switch to position "1"
2.- Press the menu buttons repeatly until the mileage is displayed within the multifunction display.
3.- Press the cluster illumination button (trip reset button) 3 times in short succession. The battery voltage will be displayed and an audible signal will sound.
4.- Turn key in ignition to position "2"
5.- Press the Up and Down Arrow buttons until service menu appears.
6.- Press cluster illumination button (trip reset button) once. The oil type menu is displayed.
7.- Use the + and - buttons to select the oil used for service.
8.- Press the Up and Down buttons to confirm. The display will show : "Reset Oil Confirmation. Push Illumination button for 3 seconds".
9.- Press and hold the cluster illimination button for 3 seconds. The message "Service confirmed" is displayed.
Read full answer
Mar 01, 2010 • 2007 Mercedes-Benz CLK550 Convertible
0helpful
1answer

How do I know if a service is coming up soon?
Press on the "CHECK" button of display, and you will be informed directly when the next service is due !!!
Read full answer
Jan 22, 2010 • 2004 Audi A4
2helpful
1answer

I need to reset the service alert on the dash (mercedes ML ,2002)
Within the first 4 seconds after moving the start switch to position 2, press the reset button for the trip counter twice within one second. The display for the service request is activated for about 10 seconds.

Within these 10 seconds, move the start switch into position "0". The service request continues to be displayed.

Press the reset button for trip counter and keep it pressed.

Move the start switch into position "2".

Continue to hold the reset button for the trip counter pressed until the signal sounds and the new start distance appears in the display (it takes about 10 seconds).
Read full answer
Nov 08, 2009 • 2006 Mercedes-Benz ML-Class
1helpful
3answers

How to get rid of ''Service Now''!
Note: the Service Reminder Indicator displays 3 messages: OEL, IN 01, and IN 02. These display to alert the driver to follow the items listed under the manufacturer's service interval. To reset the message displays, turn the ignition switch on. Press and hold the odometer reset button "A" located below the speedometer. Turn off the ignition while holding the button. "OEL" will display on the indicator. Press and hold the lower digital clock reset button "B" until five dashes appear in the display. If needed, press the odometer reset button until "IN 01" appears and then press the clock reset button until five dashes appear. If needed, press the odometer reset button until "IN 02" is displayed and then press the clock reset button until five dashes appear. To exit reset mode, turn the ignition switch on and when "IN 01" appears, turn the ignition switch off
Read full answer
Apr 02, 2009 • 2004 Volkswagen Golf
0helpful
1answer

2002 Jeep Grand Cherokee Limited pre form service needs to be erased
Service Interval

When this feature is selected a service interval between 2,000 miles (3,200 km) and 6,000 miles (10 000 km) in 500 mile (800 km) increments may be selected. Pressing the STEP button when in this display will select distances between 2,000 miles (3,200 km) and 6,000 miles (10,000 km) in 500 mile (800 km) increments.

Reset Service Distance (Displays Only if Service Interval was Changed)

When this feature is selected the current accumulated service distance can be reset to the newly selected service interval. Pressing the STEP button when in this display will select "Yes" or "No."
Read full answer
Nov 02, 2008 • 2006 Jeep Grand Cherokee
Not finding what you are looking for?

View Most Popular

2010 DTS

  • Cars & Trucks

Related Question

How do you service the stabilitrac

  • 2008 Chevrolet Equinox

70 views

Ask a Question

Usually answered in minutes!

Popular Questions

2007 Cadillac dts cigarette lighter fuse

2007 Cadillac DTS Sedan

How to service a stabilitrak on a 2006 cadillac dts

Cadillac DTS Cars & Trucks

Where is the battery located

2006 Cadillac DTS

I need a diagram for the firing order on a 2006 Cadillac DTs 4.6

2006 Cadillac DTS

2006 DTS wont shift out of park

2006 Cadillac DTS

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...