2008 Lexus ES 350 Logo

Related Topics:

A
Anonymous Posted on Sep 19, 2014

How to manually turn off dash and lock door when car wont start and key fob wont work on a 2008 lexus es350

Car will not start but dash lights remain on. Key fob won't work to lock doors either

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Jan 20, 2009

SOURCE: How Do we open the ES350(08" model) with a flat battery

The plastic cover (on the right hand side on the driver's door) on the door handle comes off and the key opening is under the cap.

Ad

Anonymous

  • 91 Answers
  • Posted on Feb 03, 2009

SOURCE: Drivers side door wil not unlock

There is lock linkage inside the door panel. many of the parts are plastic and are designed to break if someone attempts to break into your car (I had this happen to my 87 camery) I replaced the green plastic "knuckle" and it fixed it.

Anonymous

  • 1 Answer
  • Posted on May 19, 2009

SOURCE: lexus rx330 electronic computerized key broke off. chip is ok

I got key shell for cheap on e-bay, replaced the chip from broken shell and locksmith cut me the key from original. Works great for total around $35

mkv0525

Mike Vincent

  • 358 Answers
  • Posted on May 21, 2009

SOURCE: 1994 Lexus LS 400 Valet Lock Stuck - Can't Open Trunk

you have to have a main key. you may be able to remove the panel and release that way. under dash. pull cable.

Anonymous

  • 578 Answers
  • Posted on Aug 20, 2009

SOURCE: Driver side door lock not working with remote key

have you door lock module and the the brain in the key one of those is your problem have them check

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to program a new keyless fob with an existing working fob on a 2008 Chrysler 300 LX

  1. How do I program my Dodge key fob without working one?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px; transform: rotateZ(-180deg);">
    How do you program a key fob without original?
    1. Replace the batteries inside the key fobs.
    2. Get inside the car.
    3. Turn on the ignition.
    4. Press the lock button on the remote key.
    5. Listen for a Lock Sound.
    6. Programming additional remotes.
    7. Turn off the ignition.
    8. Step out from your car and test the result. How to program my Chrysler key fob without working one Turn the ignition key to Accessory or "ACC". Turn the ignition key off again, and the door locks will cycle once. Press any button on the key fob 3 times in a row to program it. The door locks will cycle once again once programming is complete. https://northcoastkeyless.com/2008-chrysler-300-keyless-entry-remote-fob-programming-instructions/ the instructions to [program a fob are that you need two or need to have dealer or approved locksmith
0helpful
2answers

I have a 2007 ES 350. Changed key fob battery,now nothing works. Only immobilizer security light is flashing and engine start stop button has amber colored light on

Be sure to use the correct battery, properly in place, clean the key contacts , See owner's manual for additional information.
There are specialized locksmiths for car keys
0helpful
1answer

Lexus sc 400 anti thieif could this be why my car don't start

Yes, car will not start or will start and run for about 20 seconds and shut off if the anti theft system is active. The theft system will either disable the starter circuit, cut the fuel injector circuit or both. Sometimes you can lock the doors with either the key fob or electric door locks, then open manually with a key and then lock with key fob, wait 30 seconds and unlock with key fob or key. Occasionally that will reset the system, or turn on ignition 3 times for 10 seconds each without starting the car, (turn key to where dash warning lights illuminate, but not to the start position), wait 30 seconds then start the car, for the ECM to relearn the key code. If that doesn't work, most likely will have to be reset at a dealership. Good luck!
2helpful
1answer

Lexus es350 will not start and it gives key not detected message

Take your fob and hold it directly against the dash beside the start button for about ten seconds. Watch to see if the green light comes on. Then try the button. If it fails try your spare key same way. You likely have a low battery in the fob.
6helpful
3answers

Dash warning light not found in manual - hot to turn it off

The flashing key-inside-a-car means the anti-theft system is working properly. On page 84 of the 2009 Prius owners manual, the explanation indicates that a flashing key-inside-a-car is normal, and is desired. It should extinguish when the automobile is operating. It may be distracting, but it's a good thing!!

mlangner in Albuquerque, NM
Not finding what you are looking for?

63 views

Ask a Question

Usually answered in minutes!

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...