How do you reset driver airbag warning light on 2000 Nissan Frontier?

If you have the airbag light, it will show steady for a few seconds(the manual says 7 secs) after you turn the key from off to on(but not start) and then starts to flash. heres how you reset it, that is if there isn't any under layin problems in the system.

1. turn the key from OFF to ON

2.watch the aifr bag light closely. it will stay on for a few secs, and then as soon as it blinks off(the start of the flashing), turn the key off instantly.

3. count to 5 (1 mississippi, 2 mississippi.. ect..)

4. repeat steps 1-3 two more times until you have done the cycle 3 tinmes

5. now turn the key on and watch the light. it will start blinking in a different, slower manner. this is diagnostic mode. you can watch it for alittle while, no hurry.

6. now turn the key off again, count to 5 like in step 3 again, and turn it back on. if the procedure worked, the airbag light will not be flashing.

if it doesn't work the first time, just repeat the steps again. if it doesn't work after the second try, there is more than likely something work with the srs system and needs to be serviced by the dealer.

this seams to be a standard airbag reset for all newer nissian vehicles

WTCH THIS FREE VIDEO INSTRUCTIONS ON HOW TO RESET YOUR AIR BAG LIGHT WITHOUT A COMPUTER IF THE VIDEO DOSENT WORK GO TO WWW.VEHIX411.COM " />

You will have to take to dealer in order to use Nissan consult scanner, but if the diagnostic trouble code given is a current fault(such as shorted or broken wire,or failed component)
then the technician will not be able to simply reset the trouble code, until the problem is repaired. You may think dealers are expensive but we are trained specifically for your cars, and as always you get what you pay for!