Question about 2002 Cadillac Deville

1 Answer

Where's the idle screw on a 2002 Cadillac Deville

Where's the idle screw on a 2002 Cadillac Deville 4.6 liter. I'm installing a new idle control sensor.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Cadillac Master
  • 959 Answers

No screw - fully computer controlled. Also, there is no idle control sensor - just a throttle position sensor (TPS) and an idle air control (IAC) motor. If you are replacing the IAC, clean the throttle body ports VERY carefully using a recommended solvent.

Posted on Sep 27, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 85020 Answers

SOURCE: 2002 Cadillac Coolant sensor

The engine coolant temperature sensor is located on the driver side of the engine near the rear of the engine compartment

Posted on Oct 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I INSTALL A TPS ON MY 2000 CADILLAC DEVILLE 4.6 ENGINE?


Throttle Position Sensor Replacement
Remove the idle air control (IAC) electrical connector (1) from the IAC sensor (4).
Remove the manifold absolute pressure (MAP) sensor electrical connector from the MAP sensor.
Remove the water pump belt cover.
Remove the TP sensor retaining screws electrical connector (2) from the TP sensor (3).
Remove the TP sensor electrical connector (2) from the TP sensor (3).
May have video on youtube showing how to

Dec 06, 2016 | 2000 Cadillac DeVille

2 Answers

Tying to find crank sensor for 2002 Cadillac Seville std 4.6 liter


This answer covers 1999-2005 Cadillac Deville, Eldorado & Seville.
Example Engine:
2002 Cadillac Seville STS 4.6L SFI DOHC HO 8cyl.

This engine has (2) Crankshaft Position (CKP) Sensors: the Upper sensor is CKP sensor B, and the lower sensor is CKP sensor A (this is included for the OBD-II DTC codes - P0385 references Sensor B = upper CKP sensor, whereas P0335 references the lower CKP sensor (sensor A)).

Both crankshaft position sensors are located in the front of the engine just above the oil filter adapter. To access both CKP sensors, jack up vehicle on the passenger side, remove the oil filter, and the oil filter adapter, including the Engine Oil Pressure (EOP) switch. See illustration.
tying-find-crank-sensor-2002-cadillac-3hcuyyaerdphtgzyedxwn2k0-1-0.jpg
The ARROW points toward Front of Car.
1. Upper Crankshaft Position Sensor (B).
2. Lower Crankshaft Position Sensor (A)
3. Engine Oil Pressure (EOP) switch
4. Engine Oil Level switch
The Oil Filter is the can-type object below the oil filter adapter, which includes the EOP switch. Recommend: remove oil filter with an oil filter socket/strap wrench, since it's close to the oil pan.

Aug 21, 2014 | Cars & Trucks

1 Answer

Crankshaft sensor in a 2002 cadillac deville are still coming up after I replace them


check connectors must be fully seated and each wires between crankshaft sensor and Power Control Module...

Sep 21, 2013 | 2002 Cadillac Deville

1 Answer

Where is the idle screw located. Is it on the idle cylenoid. Probably spelled that wrong.


on the 4.9 liter v8 the idle speed control motor is is located in front of the throttle body it has two miniature pulley's on the side of it where the throttle cables are, there is a screw located on the idle speed control motor which can be adjusted but i would not sugggest it they are known to go out and they do affect the idle when they are malfunctioning its fairly simple to change and the its called the idle speed motor made by duralast they are seventy two dollars at auto zone the pic. of part i explained1_19_2012_4_12_07_pm.jpg

Jan 15, 2012 | 1992 Cadillac DeVille

1 Answer

Where is the idol screw on a 1992 cadilac ceville


the idle screw on the 4.9 liter is in front of the throttle body under the air intake cover. it sound like you may need to replace your idle air control valve it is located in the same area

Jan 15, 2012 | 1992 Cadillac DeVille

1 Answer

Where can i find the ect sensor on my 1999 cadillac deville


Click over pic for zoom...

zjlimited_1119.jpg

Fig. Showing the location of MAP Sensor and other components on the front of the engine: 1. Manifold Absolute Pressure (MAP) Sensor; 2. Idle Air Control (IAC) Valve; 3. Engine Coolant Temperature (ECT) Sensor; 4. Throttle Position (TP) Sensor

zjlimited_1120.jpg

Fig. Engine coolant temperature sensor (1).

Apr 28, 2011 | 1999 Cadillac DeVille

5 Answers

Engine shuts down, always at low speeds or at stop signs and lights


they all are wrong .i was a service tech for Cadillac for 15 year and guarantee you that the problem is in you're crank shaft sensor .Cadillac redesign the sensor on 2002.check for code you'll find p0355 and p0385 .replace the sensor and reprogram the new ones.good luck Danny.B

Aug 06, 2010 | 2001 Cadillac DeVille

1 Answer

How do I adjust the idle on my 89 Cadillac Coupe Deville? (Fuel injected v8 4.5 liter)


computer controlled fuel injected vehicles from GM don't have user adjustable idle speeds. The computer controls this.

Jul 16, 2010 | 1989 Cadillac Sedan DeVille

1 Answer

2001 Cadillac Deville coolant bleed screw Location??


I had the same problem with my 2001 Cadillac Deville, like you I had replaced literally everything thermostat, water pump, radiator, temperature sensor, reservoir and cap, hoses etc....I didnt have any leakage. I was told I had air in my coolant system. After a lot of research and running across the right mechanic I was able to locate the bleeder and remove the air from my lines. No problem since. The bleeder is located on yhe left side of the radiator on the crossover, mines was sideways..Hope this helps someone before they spend money for new head gasket problems..Try this it helped me....

Mar 25, 2009 | 2001 Cadillac DeVille

Not finding what you are looking for?
2002 Cadillac Deville Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...