Often get por reception and static on 2002 Mercedes E 320
SOURCE: method of charging a 2004 Mercedes E320 battery
It is always safer to charge the battery out of circuit, Removal of one cable will insure you can safely charge without hurting electronics on board. Generally if your battery is already sufficiently charged it acts like a capacitor in the circuit and will prevent damage, but many battery chargers do not always put out a pure dc voltage and this can damage electonics.
SOURCE: 99 mercedes e320.check engine light on.po341
that appears to be a camshaft position sensor performance code. you can start by checking to see if the sensor is working properly, re-check and make sure that the harness is ok by checking the resistance through the harness if all looks well there make sure the computer has the latest software on it by having it scanned at your local dealer. also you can check the reluctor wheel on the camshaft for damage or debris in the way of the sensor.
hope this helps!
SOURCE: what is the best engine oil for the mercedes e320?
The best oil for any car is 5W-30 synthetic, I personally recommend Mobile 1. 5W-30 Synthetic flows more rapidly to engine parts thereby reducing "dry start" wear. In addition, full (not part) synthetics contain fewer additives (they don't need them) than conventional oils. Conventional oil additives "burn off" rapidly (500-1000 miles) after an oil change and sludge accumulates over time as a result.
Synthetic oils use much less of these additives (5% vs 20-30%) than conventional (Dinosaur oil) so there's much less sludge to build up. Synthetic oil also has a more uniform molecule size, this extends oil longevity and reduces running temperature.
I've personally used Mobile 1 for many yeas in my cars and would recommend it although I'm quite sure that other FULL synthetics would offer similar benefits.
SOURCE: how do you change the low beam on an e320 Mercedes
Sit down outside your front wheel by the side marker light with a stright screwdrive and gently pry it off back toward yourself. this assembly will flop out to you. won't get to it any other way....low beam ? I have not replaced one yet. got you halfway there. don21093
160 views
Usually answered in minutes!
×