1997 Lexus ES 300 Logo
A
Anonymous Posted on Sep 08, 2014

Why horn not sound when you press remote door opener-1997 lexus es300

why horn not sound when you press remote door opener-1997 lexus es300

1 Answer

belva gonda

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Feb 21, 2015
belva gonda
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Feb 21, 2015
Answers
1
Questions
0
Helped
167
Points
1

Oh my goodness!, to turn the horn sound (when you unlock the doors) up or down on a 1997 es, reach under the steering wheel under the dash and you'll feel a knob there. turn it. I have this car and found the knob last night, turned it, realized what it was for.

5 Related Answers

Anonymous

  • 290 Answers
  • Posted on Mar 23, 2009

SOURCE: The Lexus car remote key control model ES300

try this:

1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into the ignition (DO NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.

5. Press any button on remote for a minimum of 1 second.
System should now lock and unlock doors once.

6. Close and open drivers door.

7. Press any button on remote for a minimum of 1 second. System should now lock and
unlock doors. Once to confirm programming, twice to indicate programming failed.

8. Repeat steps 5, 6 and 7 for additional remotes.

Ad

Anonymous

  • 3600 Answers
  • Posted on Jun 26, 2009

SOURCE: 1997 Lexus front door will not open from outside

unless you are mechanically inclinde don't mess with it get someoen you love and adore to do it for you, you can break the tabs that hold the door on and it can get expensive the worst part is it might not open at all if you don't understand how to operate it unless you have one of the experts here helping you with it step by step, but could take as much as 4 hours depending on your ability to work with your hands. Some people just don't need to own wrenchs they are a danger to themselves and the public at large, not saying they are not smart but just don't have the know how and motor skills. I am telling you this so you won't have a headache on your hands.

Anonymous

  • 6 Answers
  • Posted on Jul 24, 2009

SOURCE: amplifier location 1993 lexus es300

My Son has a 95 es300, the amp for it is located under the front passenger seat. The easiest way to access it is to remove the 4 bolts holding the seat down, and remove the seat. Takes about 5 minutes

Jonah Oneal

  • 14092 Answers
  • Posted on Aug 11, 2009

SOURCE: How do I change AC blower motor on 1997 Lexus ES300?

THE BLOWER UNIT IS LOCATED IN PASSENGER COMPARTMENT ABOVE THE RIGHT FRONT FOOT WELL.YOU HAVE TO REMOVE THE GLOVE COMPARTMENT LINER.THE GLOVE COMPARTMENT DOOR AND THE AND THE RIGHT LOWER DASH PANEL.THEN YOU CAN REMOVE BLOWER MOTOR SCREWS AND BLOWER MOTOR.

Testimonial: "good instructions!"

Anonymous

  • 10 Answers
  • Posted on Jan 23, 2010

SOURCE: How do you find the cabin air filter in a ES300

by the gas pedal to the right, youll need to pull carpet back. here's a step by step with pictures http://www.clublexus.com/forums/es300-and-es330/168680-es300-a-c-or-cabin-filter-change-97-01-a.html

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I fix Gas Tank Door?

Try spraying lube in latch mechanism once door is open. You may even have to bend striker plate on door if possible. Try lube first. "PB blaster" works well

If you need further help, I’m available over the phone at https://www.6ya.com/expert/rodger_15a879d9d9556eea

3helpful
1answer

Lexus ES300 door auto lock and unlock does not work

i have a 1997 lexus es300 having problems with unlocking the doors and the trunk with the keyless remote the doors will lock with the keyless remote
0helpful
1answer

Fuse box on a 1997 lexus es 300

On this website, you find fuse box diagram and description for Lexus ES300 (1997)

Lexus ES300 1997 fuse box diagram Auto Genius
0helpful
1answer

Looking for fuse box

under the hood and under dash on driver side
0helpful
1answer
3helpful
3answers

What battery goes in remote entry key for 2001

I just took my 2001 Lexus ES300 key apart and the battery is a CR1616 3V
14helpful
3answers

The Lexus car remote key control model ES300

try this:

1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into the ignition (DO NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.

5. Press any button on remote for a minimum of 1 second.
System should now lock and unlock doors once.

6. Close and open drivers door.

7. Press any button on remote for a minimum of 1 second. System should now lock and
unlock doors. Once to confirm programming, twice to indicate programming failed.

8. Repeat steps 5, 6 and 7 for additional remotes.
Not finding what you are looking for?

177 views

Ask a Question

Usually answered in minutes!

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...