2004 gmc canyon turn signal flashers replaceable part or not that is the question.
There isn't one. There's two fuses for the turn signals. The flashing is controlled by the Body Control Module.
http://www.stockwiseauto.com/product_info.php/products_id/324058/fit_id/11132/Year/2004/Make/GMC/Model/Canyon?gclid=CJGg7sPHhsMCFRRcfgod5gsA9g
you can find it at almost any auto parts store just to give u an idea. Right side kicker panel. Good luck.
2004 GMC Canyon Body Control Module ACDelco 19115249
Are you looking to replace the Body...
SOURCE: I have a 2005 GMC Canyon that the Hazard flashes
replace switch. Try cleaning it with some electrical or brake cleaner first.
SOURCE: 2004 GMC Yukon xl......If I put left turn signal
That vehicle has all three switches attached to the same module. Spray a little wd-40 into the flasher switch. Sometimes the slide on the flasher switch gets a little sticky and won't allow the turn signal to work independently. If that isn't the case, there is a repair kit for that available on ebay. the module of course costs around three hundred to replace but could possibly be found at a boneyard for much less. Also, check ebay for that module. Hopefully the WD-40 will fix it. Good luck.
SOURCE: 2004 gmc canyon no blinking lights
This problem could be a fuse, flasher or signal light switch, the most common is a fuse or flasher, i would first check the fuses and is they are good then replace the flasher.
346 views
Usually answered in minutes!
×