SOURCE: how to adjust halogen headlights on bmw z4
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
support.
You will have vertical adjustment screws for each independent beam
(separate highs and separate lows, but will be same screw if highs and
lows are the same bulb). You may also have additional horizontal
adjustment screws as well
Park
your car on a level ground 30 feet from a wall and measure the height
from the ground to the bulb and mark on a wall (do this for highs beams
and low beams if the bulbs are separate, if highs and lows are the same
bulb, only do it for the lows)
If the headlights read VOR, then
aim the brightest part or cutoff part just below the mark on the wall.
If it says VOL or nothing, aim them 2 inches below the mark on the wall.
SOURCE: need a 2003 BMW, z4, 2.5, water pump diagram
CLICK on the following LINK. It has the Belt Diagram you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2003/make/bmw/model/z4/2003_bmw_z4_drive_belt_routing_diagram.htm
Testimonial: "I thank you very much for your expertise, will install the belts this week end. Poorman, thanks you again. Doing it my self is saving me alot of money"
SOURCE: what type of battery is required for a bmw z4 3.0
BMW Z4s need a special type of vented battery. The closest alternative to the OEM battery would be the Interstate MPT-H6 which you should be able to purchase from any place carrying Interstate batteries (most places do).
297 views
Usually answered in minutes!
×