Replace ignition key cylinder from 91 Honda accord

You can try first with some penetrating oil to spray it in the key lock and let stand it for some minutes. than try carefully to bring in 0 position to get wrong key out . hope it works out.

check the hydraulic clutch is releasing /engaging the clutch plate. Replace the clutch master cylinder if there is no clearance at the clutch slave cylinder piston rod. If cable clutch replace the cable as it is not allowing the clutch to engage.

Check the fuses, if they are all good then change the window motor on that one door!

Check fuel pump fuse and all other fuses, check brake switch, Also, a worn ignition switch will cause the car to start sometimes but not always. Try turning the switch to on position, then jiggle the key around in the switch while pushing in a bit...now start the car...did it start? If yes, replace switch and/or key cylinder....

check fuses or see if something might have got jamed in the track and also try movin the part where the seat belt moves back and forth to see if the motor is dying

It needs the electrical portion of the ignition switch(back half).Remove lower knee dash cover,to expose back of switch assy.it is held in by two screws,remove and replace electrical portion

remove the hose ...this is to the radiator correct just make sure the motor has not been Running or you will get burnt also use a pan to collect the antifreeze and refill the radiator

you have to replace your ignition, you can't repair that one

theres screws on the back of the shift knob where you hand goes

if ther is i havent herad about it but wat u can do is find someone who knows about it and ask him or go to a professional