Re: How do I put my 2004 Hyundai xg350 into neutral
There should be a shift-interlock bypass slot on the center console. Look for a small "button" that covers a slot. Use a key-shaped device to press into the slot and that should enable the shifter to move.
Turn the crankshaft until the timing marks on the camshaft sprocket and cylinder head are aligned.
Loosen the timing belt tensioner bolt and turn the tensioner counterclockwise as far as it will go. Tighten the adjusting bolt.
Mark the timing belt with an arrow showing direction of rotation.
Remove the timing belt.
If defective, remove the timing belt tensioner.
Timing belt sprocket alignment mark positioning for belt removal and installation—3.5L engine
To install:
If necessary, install the timing belt tensioner.
Attach the top of the tensioner spring on the engine coolant pump pin. Ensure the hook on the pin is facing down and the hook on the tensioner is facing away from the engine
Rotate the timing belt tensioner to the extreme counterclockwise position. Temporarily lock the tensioner in place.
Align the timing marks of the camshaft and crankshaft sprockets.
Install the timing belt on the crankshaft sprocket, then onto the rear camshaft sprocket.
Route the belt to the coolant pump pulley, the front camshaft sprocket and the timing belt tensioner.
Apply force counterclockwise to the rear camshaft sprocket with tension on the tight side of the belt and check that timing marks are aligned.
Loosen the tensioner bolt 1–2 turns and tighten the timing belt to a tension of 57–84 lbs. (260–380 N).
Turn the crankshaft two turns clockwise.
Readjust the sprocket timing marks and tighten the tensioner bolts.
Install the timing belt covers.
Install the crankshaft pulley and tighten to 108–116 ft. lbs. (150–160 Nm).
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I am a mechanic ..most people ask questions about these foreign hyundai motors ..below is an example of engines that basically if you ask about a Hyundai Xg 350 ,xg300 ..well allow me to hammer 90% of your questions in case you want to grab another motor ..these motors listed will work on 90% of all hyundai products ...Look at the starter sizes ,,all the same for the selected models ..then look at the motor sizes ..This will help you in solving some problems most do not give the specific questioning 100% NEW REPLACEMENT STARTER FOR STARTER
HYUNDAI 2001 SANTA FE 2.7L ENGINE 2002 SANTA FE 2.7L ENGINE 2003 SANTA FE 2.7L ENGINE 2004 SANTA FE 2.7L ENGINE 2005 SANTA FE 2.7L ENGINE 2006 SANTA FE 2.7L ENGINE
2003 SANTA FE 3.5L ENGINE 2004 SANTA FE 3.5L ENGINE 2005 SANTA FE 3.5L ENGINE 2006 SANTA FE 3.5L ENGINE
Sep 27, 2012 - 9 posts - 5 authors
An automotive shop pulled up the car and said their was a fuse box with a lot of relays in it on the passenger compartment .... 2004 XG350L .... Same thing happened to me, 2002 XG350, sunroof, blower, vanity light all out.
Hyundai XG350 wipers not working Questions & Answers ...
www.fixya.com > ... > wipers not working > Cars & Trucks > Hyundai
Hyundai XG350 cars & trucks wipers not working questions and answers. Ask your Hyundai wipers not working related question. ... 2004 Hyundai XG350.
Hyundai wipers not working Questions & Answers - Fixya
×