Replacing rear light bulb 2007 Nissan Versa four door hatchback

SOURCE: 2007 Nissan Versa Hatchback & driver's seat height adjustment

you have to have the plug on the floor to add the new seat .It plug in to the electric make work ore you have to have the dealer do this for you if not there, Do web search on Junk Yard dog,com for one your cars that year that been crash see you get the eletric seat half price then what the dealer has.
You have post what you need year make model on the site. You have post what you wanted alos the kinda seat it is.
But you need the plug to hook up first.
seat are bolted on 4 nuts screwed the bottom the floor and normal has plug for electric seats
Hope this give you idea what your looking for

SOURCE: replace tailight in 2007 nissan versa hatchback

Open the hatch and locate the 2 plastic covers, behind the tail light area on the inside panel. Remove these covers and the nut (8mm) behind them to access the light assembly. Pull lightly on the light assembly to remove, then replace the bulb.

Dar

• 2007 Answers
• Posted on Oct 18, 2009

SOURCE: replace the rear signal light bulb

Should be accessable from inside the trunk, behind the panel. Turn bulb holder counter clock wise, and remove from socket.

SOURCE: How do you remove the rear light cover in order to

Open the hatch and look to the side of the housing, there should be a tab sticking out of the side of the assembly with a screw securing it in place (It's between the trim seal and the assembly). Then in the inside of the hatch, look up to where the assembly would be, and there should be a long cylindrical nut (it's made of plastic and will have a metal center for the threads). Remove this and then you can pull the entire assembly off. You won't have a lot of room though because the wires are relatively short.

SOURCE: is the replacement of the brake light bulb under

this may or may not be you can call your local dealership and ask. if not then it's only a couple dollars at the part store and a verry easy fix. just pull the carpet down in the trunk behind the tail light and remove the small 10mm nuts the light will now pull out and you can replace the bulb. verry simple