I HAV WARNIN LIGHT ON FOR FLAT TYRER BUT I HAV NOT GOT FLAT TYRER SO HOW DO I GET WARNING LIGHT TO GO OF PLZ
SOURCE: run flat tyre warning light is on i have checked tyre pressure
This will only come on when a tyre has dropped in pressure (not spare). It work on the principle that a tyre with less air has a smaller rolling circumference and therefore a different wheel speed. This is then monitored against other signals from other wheels and determined that a loss in pressure has occured.
If all tyre pressures seem ok, there could be a chance of a small unoticeable leak and would require a bath test. This is when the tyre is dipped in water and bubbles would appear where the puncture is.
Ultimately the system may just need to be reset, or has incorrectly been reset from a tyre change. For this you just press and hold the TPC button (located on the centre console above the gearstick - looks like a flat tyre with an exclamation) turn on the ignition to position 2 and the light will come on re then yellow,go out, come back on yellow. When it comes back on yellow it re-initializing the system. You can let go of the button and after 20 odd seconds the light will go out for the final time, completing the reset.
If the light continues to come on after the reset then you definitely have a puncture somewhere!
Hope this helps!
SOURCE: need to reset to run flat tyre warning light on
i have a bmw , 1 series, i have just put air in my tyres and there is now a warning light on the dashboard, have i over inflated my tyres?
SOURCE: how do i reset flat tyre warning light
To reset tyre warning
switch ignition on,press reset near gearlever
Don,t think connected
Testimonial: "thanks very easy"
SOURCE: BMW 320D,2006- run flat tyre warning light is on. How do I reset?
Using the indicator stalk, navigate to the tyre pressure reset option, press the reset button twice in short succession but hold it in the second time until a tick appears on the display
SOURCE: How do i turn off the 'epc' warning light on a AUDI ?
You will need a scan tool, or just drive the car and if it was due to battery once the computer finishes running its diagnose checks it will turn light off, this may take a week and some driving around. you could also have the computer scanned to see what code is stored and see if its due to the battery.
239 views
Usually answered in minutes!
×