I have a 2001 nissan xterra - it will not engage in reverse - no other noticeable problem with any other gears - any solutions?
Does it seem to bog down when in reverse as you accelerate? If so the trans maybe stuck in forward gear (mechanical problem) resulting in both forward & rev being applied.
SOURCE: Nissan 300zx no reverse or 4th gear.
Hi,
The first place I would look is the shift linkage for wear and a sloppy connection from wear.
adjustments may be made as a possible fix on the linkage rod.
Glad to be of assistance - Please rate the response - I can learn from your rating. Thank you
SOURCE: Does my 2001 3.3L V6 EFI Nissan Xterra have a non
It's has a timing belt, also it's an interference engine, if belt goes bad it will bent valve's .
SOURCE: I can't shift into reverse. All other 5 gears are
My VW is not shifting into reverse at all; I think a certain person was driving and mistakenly pressed the gear shifter down for all gears--reverse is the only gear you press the shifter down first in. Doesn't grind, 1 2 3 and 4 work but no reverse no reverse lights.
I've read several complicated (can't see scenario's) posts on screens and linkage and a cable fixed one guys problem but still no solutions.
SOURCE: Diagram available for 01 Nissan Xterra Knock Sensor location?
V6 3.3L The sensor is located underneath the air intake manifold on top
of the engine block. This should take an experienced mechanic about 3-4
hours to replace.
Fig. Engine compartment component locations
Hope this help (remember rated this free help) Good luck.
2,243 views
Usually answered in minutes!
×