You need 2 persons to bleed brakes one have to seat inside the car and pump or hold brake pressed,Add brake fluid to the top ,next ask someone to pump brake few times when it will get hard,then hold while pressing loose bleeder half a turn the pedal will go all the way down and still need to be pressed ,fluid will run through the bleeder ,then tight bleeder back and repeat the steps ,pump, press, bleed ,few times per each brake caliper ,don't forgot to add fluid to the reservoir
Fig. 1: Loosen the front brake line in order to bleed the master cylinder
Fig. 2: Connect a bleed hose from the bleed valve on the front caliper to a jar of brake fluid
Fig. 3: Always follow the lettered sequence when bleeding the hydraulic brake system
Hope this helps to solve it; remember to rate this answer.
240 views
Usually answered in minutes!
×