Removed ECM found what thought to be serial number for new ECM

Question edited for clarity and format. Personal phone number removed. Fixya has 11 million views a year. How many do you want to phone you, 10 percent, 1 percent?? :>D
Question moved to Dodge Neon category after adding the word 'Dodge'. Full year make model in all questions please.

If the intake gasket had an air leak, it would cause rough idle and 'hunting'. This issue with the Dodge Neon is well publicized. Videos and text based articles in the link

https://www.google.com/search?q=2001+neon+se+bad+idle

..

Check this link out Janella. Where is the ecm relay in 2001 dodge neon Google Search

Reprogram the ECM.

For no spark problem,click the link below :---Car has no spark? http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html

THAT CODE NEEDS TO COME FROM THE DEALER ,SORRY

hood:
http://www.car-stuff.com/carparts/dodgeneon20002005replacementdg29031.html?roicid=U1172810084W45e7a9647e3bb&csho01dodgeneon20002005replacementdg29031
front bumper:
http://www.discountbodyparts.com/catalog/?ymmsearch=true&Ntt=2001+Plymouth+Neon+Bumper_Cover+DG2905P&dbpid=froogle&dbpplymouthneon20002001replacementdg2905p1buco01plne

as far as a replacement trunk lid your best bet is to call around junkyards in your area. The only replacement one online is carbon fiber and runs about 500$.
Thank you,
Lee

call your local dodge dealer they will need your s/n on your radio to give you code serial/ number

NO, IT IS A 2001
WHAT THEY MEAN IS YOU ARE LOOKING FOR THE O.E.M. PART # THAT STARTS WITH 529 AND THEN THE LAST 2 DIGITS SHOULD BE: -AD or -AF or -AF or -AK
THATS THE INFO THEY NEED!!
:-)

was it a new column?did you transfer the skim module to new column?junkyard column?did you use the junkyard module?if you did,engine controller is not recognizing skim module secret code..these modules cannot be used from another vehicle..if it's damaged,you'll need to replace it..chrysler dealer must program new module secret code for it to function properly

Location of "ECM" is Under the Air Filter Box

1. Disconnect the negative battery cable.
2. Remove the air cleaner box, refer to the air cleaner box.
3. Remove the gray and black connector from the PCM.
   1. Remove the harness clip bracket from PCM bracket.
   2. Remove the nut from the upper bracket mount.
   3. Raise vehicle and support on hoist.
   4. Remove 2 lower bracket bolts.
      1. Remove 4 screws from bracket and remove bracket from PCM.
      INSTALLATION
      
      1. Install bracket to PCM and tighten screws.
      2. Install PCM and bracket to body and tighten the 2 lower bolts.
      3. Lower vehicle.
      4. Install upper bracket nut and tighten.
      5. Clip in wiring harness bracket.
      6. Install gray and black connectors to the PCM.
      7. Install the air cleaner box, refer to the air cleaner box.
      8. Connect the negative battery cable.