Serpentine belt diagrams

SOURCE: diagram for serpentine belt for 2002 BMW 525i

An image of a serpentine belt, hope this will help you,
Eitan.

SOURCE: need to install belt

i made this with paint. hope it helps. typically on a bmw the belt goes between the water pump and crank pulley to the tensioner; if this is a 99 to 06 ish 3 series and some 5 s you will be good

SOURCE: DIAGRAM FOR 2003 BMW 330i SERPENTINE BELT

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

SOURCE: need serpentine belt diagram for 1994 bmw 325i

Below are diagrams for both the M44 and the M50 engines. On the M44, you may need to hold the tensioner in the retracted position with a drill bit or hex tool through the hole in the front of the tensioner. The belt tensioner is automatic so no tightening is necessary. Best of luck!
Greg

M44







M50

SOURCE: i need a diagram for

Should be on a decal on the underside of the hood.