Performance restricted warning light
SOURCE: 2001 Jaguar XJ8 Idles rough while sitting
o2 sensors often cause a rough idle at stand still. Previously my xj8 had crank case ventilation (pvc valve essentially) issues that caused the check engine w/ restricted performance. I noticed a severe drop in gas mileage as well. Jaguar dealer fixed my problems in a few hours and it was surprisingly cheap. Its worth taking it to advanced or auto zone to see what the computer says. Then decide if you want to shell out for a dealer fix or if you can tackle it yourself. BTW, just to justify myself this is my third jaguar. I have a '94 xj6 with a chevy 350 inside it, previously owned a 95 XJ6 and currently have the xj8. They are wonderful cars if you can put up with their rough times.
SOURCE: check engine light is on,display says restricted performance
Anything can cause the check engine light to go on from a loose gas cap, to a transmission issue. When the onboard computer detects an issue, it will restrict performance so as to not damage the engine any further. An Oil change won't affect this light. The only way to determine the cause of the light is to have the computer scanned with an OBD-II tool (Autozone does this for free) to determine the codes and cause for the light. You can also clear the light with the OBD-II tool, but if the problem is still there, the light will just come back on
SOURCE: 2003 Jaguar S Type R 4.2L SC. Check engine light
Rent a scanner, read out any code(s), and pursue to repairs. It may be as simple as bad spark plugs and wiring, or worse, fuel problems from the injectors back to the fuel tank. A worn O2 sensor can cause improper fuel/air problems.
SOURCE: jaguar s-type restricted performance
I had the same problem. Restricted performance and running rough at 3000 RPM. I have an OBDII code reader and found that the problem was in the air mass flow sensor, which is just after the air filter. I pulled this out and found it was dirty and had butterfly wings in it. The last shop where I had the oil changed replaced the filter for me but put in the wrong size. Close but no cigar. Bought some *** Flow Sensor cleaner at auto store and fixed the problem. Get an OBDII reader with the ability to erase the codes. Comes in real handy.
35 views
Usually answered in minutes!
×