What makes a chevy traverse makes noise ehen turning left just got new rack and pinion

SOURCE: 05 impala steering noise. Rack or Power steering pump

the power steering fluid is probly the first thing u should check if that doesnt fix it replace ur fluid pump,.the resevior should be right around ur brake booster and master cylinder,.hope u fix it and find it

SOURCE: steers hard when turning around

try lucas power steering stop-leak. drain some of the fuild and then pour that in. it is for surging rack & pinions, not just for leaks. if that doesn't work then you may have a defective rebuilt rack.
check power steering pump pressure, might be weak.

SOURCE: rack pinions and bushing installement

pretty decent job ahead first jack up car support with jack stands remove front wheels remove nuts on tie rod ends remove tie rod ends from spindles with tie rod end tool or tap with malet were they sit to loosen them hit the spindle area not the tie rod or tie rod threads then dissconnect power steering lines from steering rack also disconect steering linkage to rack there should be 2 main bolts holding assembly to frame remove them should free rack i know that car may have a unique design were u may have to remove inner tie rod ends first if it has those round bushings that always go bad disconect inner tie rod ends behind engine on top of steering rack then remove rack from wheel well replace those inner tie rod bushings u may be able to leave outer tie rod end connected to spindles and u may be able to get to the sterring rack from behind engine good luck

SOURCE: how to replace rack and pinion on chevy 2003

Silverados do not have rack and pinion steering. The steering box is bolted to the frame on the drivers side, that can be removed by removing the bolts holding it on, the steering shaft bolts, and the pitman arm.

SOURCE: 05 silverado hard to turn. new pump! is it a bad rack?

since the rack is used it could be defective. aligning the vehicle will not loosen the steering up