The truck shuts off and losses all power then you what 2min and it will start again.
601 is internal memory code.
899 is power take off code, Dealing with loss of power.
0164 is loss of communications. Again this could be loss of power.
Clear the codes. run it down the road for a while , check codes again.
If they come back, you either have a bad wire some where or the control module is bad..
SOURCE: Vehicle shuts off and will not start back up right away. P0601
what that means is your engine goes into protection mode and shut's off this is mostlikel;y do due to low coolant level or low oil level/pressure. have this checked by a qualified tech. diagnostic equipment must be used to clear the code after the problem is solved in order for your vehicle to run properly
SOURCE: I have a vortec 350 setting a trouble code P1345,
p1345 is a crank/cam sensor correlation fault possibly due to a
failure in this solenoid.other possible causes include engine timing
SOURCE: what does code c0899 device power circuit low mean?
You have a stability control issue, take it to the garage, to check it out which sensor is at fault
777 views
Usually answered in minutes!
×