2000 saturn brake torque specs - 2000 Saturn SL

www.alldatadiy.com

Try Haines Manuals on line

Best solution www.reliable-store.com has books on every vehicle and also how to service/repair it.
service/repair/owner's/maintenance manual with
parts info, fuse box, gear box, PCV, torque specs,coiling, wiring diagrams, electrical diagrams, fuse diagrams, error codes, etc everything
Worth it

Get this manual online at www.reliable-store.com and get complete guide on whether to repair or not, service it, and how to repair etc, along with wiring diagrams, electrical diagrams, torque specs, error codes, everything.

2003 Vue Torque Specs? - SaturnFans.com Forums

www.saturnfans.com > ... > Models > Saturn Vue > Vue Tech

Feb 4, 2009 - 6 posts - ‎5 authors
Does anyone have/know where I can get the torque specs for a Saturn Vue? ... See attached for 2003 2.2 and 3.0 engine torque and front ... need vue torque specs
9 posts
Oct 13, 2010
Filter cap and drain plug torque spec
14 posts
Feb 19, 2009
Lug Nut Torque?
5 posts
Oct 6, 2008
S-Series Torque Specifications
15 posts
Nov 13, 2004
More results from www.saturnfans.com

1. Torque Specs For F250 Caliper Bolts - Diesel Forum - TheDieselStop.com

   www.thedieselstop.com > ... > 1999-2007 General Questions Jan 13, 2009 - 3 posts - ‎1 author
   Does any one know what the caliper bolts torque specs are? ... Disc brake caliper pin bolts - Excursion, F-250/F-350 with Ford and Dana axle ... Torque specs for front brakes
   5 posts
   Mar 12, 2009
   05 F250 brake torque specs please
   6 posts
   Aug 22, 2007
   Brake caliper torque specs
   5 posts
   Jul 14, 2007
   Front brake Caliper Bolt Torque
   6 posts
   Apr 25, 2005
   More results from www.thedieselstop.com

First you want to remove brake fluid from brake resovoir, raise front wheels off ground and set park brake or block rear wheels. Remove front wheels, keep steering wheel unlocked so you can turn rotors side to side. Loosen bolts that hold caliper end gently pry caliper free from rotor, remove caliper and remove pads, use bungy cord to hang caliper away from rotor, have rotors measured to see if they are thick enough to have machined, replace if out of specs. Match up pads with old ones, use anti- squeak red liquid and put layer on back of pads, let dry. Use tool to put pistons back into calipers, slowly put pistons back into bore while opening up bleeder screw so ABS won't be damaged. After rotors resurfaced, wash with rubbing alchohal to remove any oils from hands, install rotors and reverse putting pads back onto caliper and reinstall, torque caliper bolts to factory specs and tighten bleeder screws. Install wheels, torque lug nuts to factory specs and replace brake fluid in resovoir. Lower car carefully to ground and press brake peddle without pumping it. Any air in system should bleed out, if not get someone to help with bleeding system. Road test to ensure no squeaks or pulling, burn brakes in slowly.

Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

there are 2 different 1.9 engines, so for future ref, you need the 8th digit of the VIN number. use NEW bolts. torque to 22 ft lbs. then turn 90 degrees, then another 90 degrees.

Hello and welcome. here is the torque specs for the bolts.

Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
caliper brake bracket bolts torque to 180 n.m or 133 ft.lbs