2003 Ford F250 Super Duty Crew Cab Logo

Related Topics:

m
mark Posted on Aug 05, 2014

How can i fix or remove code TBC on dash of my 2006 ford f250

3 Related Answers

Aceppdug

  • 75 Answers
  • Posted on Feb 03, 2010

SOURCE: what is a tbc fault on a 2006 ford f350 6.0

That is your trailer brake controller that is built into your dash. If you are hooked up to a trailer it could mean you are losing your connection or ground to the trailer. If you are not connected to a trailer it means there is a problem with your brake controller possibly a short in the wiring caising the fault code.

Ad

Anonymous

  • 3600 Answers
  • Posted on Apr 11, 2010

SOURCE: 2006 Ford F250 Super Duty,6.0 L Diesel. Turn on

the connector is wet dry it out then push plug back into the plug in to solve problem.

A

Anonymous

  • Posted on Nov 21, 2013

SOURCE: ford f250 check trailer and tbc fault

http://www.ford-trucks.com/forums/636646-help-ford-tow-command-tbc-fault-message.html (Post #15 looks useful)



http://www.thedieselstop.com/forums/f27/tbc-fault-check-trailer-306929/

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I had a TBC fault code on my 2006 F250 I replace the fuse now how do I reset the fault codes

If you have a code reader, use it. If not then if the problem is fixed it may go away after the computer runs its test which could take a couple of days.
0helpful
1answer

Why would a TBC fault on a 2006 ford f350 keep the truck from turning on?

Not sure, but read another person had same situation. They replaced the trailer wiring harness and fixed the problem.
1helpful
1answer

Obd port f250 2006 model

should be under dash on driverside
10helpful
2answers

What does tbc fault mean on a 2006 f350

TBC means Trailer Brake Controller fault.Check for moisture/water in the trailer plug connector at the back of your truck. Water/moisture will cause TBC error codes. Look for moisture at all connections to the plug and inside the plug.Trailer brake controller that is built into your dash. If you are hooked up to a trailer it could mean you are losing your connection or ground to the trailer. If you are not connected to a trailer it means there is a problem with your brake controller possibly a short in the wiring caising the fault code. ----- It means either A) you have a bad ground on your trailer. Or B) your cable on your trailer is too short and causing it to pull out of the plug or C) you have a short in the factory trailer harness wiring or the plug is gunked up. --------- get this possibilities checked.It will help.Thanks.Helpmech.
0helpful
1answer

What is location of turn signal flasher 2006 f250

The flasher on a 2007 F250 and F350 is located on the R side of the Kick panel on the drivers side (center of the dash). There is a black cover that is covering the flasher and will need to be removed. This can be acomplished w/o pulling the dash loose.
26helpful
2answers

What is a tbc fault on a 2006 ford f350 6.0

That is your trailer brake controller that is built into your dash. If you are hooked up to a trailer it could mean you are losing your connection or ground to the trailer. If you are not connected to a trailer it means there is a problem with your brake controller possibly a short in the wiring caising the fault code.
Not finding what you are looking for?

2,376 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...