2005 Ford Five Hundred Logo
A
Anonymous Posted on Aug 03, 2014

P0191 car doesn't start and check engine light is on with code p0191

1 Answer

montehammons

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Ford Master 5,531 Answers
  • Posted on Aug 03, 2014
montehammons
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Sep 14, 2011
Answers
5531
Questions
2
Helped
1645256
Points
17401

You need to have the fuel pressure checked, to see if the fuel pump or fuel filter may have a problem. The code is for the Fuel Rail Pressure sensor, and the reading from it is out of range.

1 Related Answer

saailer

David Burbee

  • 1871 Answers
  • Posted on Mar 04, 2011

SOURCE: ford taurus 2002 diagnostic says

Hello! the P1506 is indicating a defective Idle Air Control (IAC) valve,,,P0191 is indicating a fuel rail pressure sensor (FRPS) fault...I suspect a cause and effect on the two codes...
Cause= IAC...Effect= FRPS....See photo below...Remove and clean with throttle body spray cleaner before you purchase a new one...It may only be blocked with carbon...Guru..Saailer



saailer_146.jpgACDELCO Part # 2171810 Cost $70

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have replaced the maf sensor,the fuel pressure sensor and the fuel pump, not sure what else to do. The engine light stays on and after some warmup, difficult to start. Thanks for your time.

https://www.yourmechanic.com/article/p0191-obd-ii-trouble-code-fuel-rail-pressure-sensor-circuit-range-performance-by-jamahl-walker
0helpful
1answer

I'm getting a p0191 sensor 1 on my 2007 explorer. Replaced maf sensor + fuel pressure sensor + fuel pump. Light comes on when engine warm +and then hard to start.

P0191 Ford Fuel Rail Pressure Sensor Circuit Range Performance

SENSOR 1 ??????????? There is no sensor one involved here . After replacing all those parts an not fixing the problem ,suggest you take it to a qualified repair shop. The proper thing to do would be to do the diagnostic's for code P0191 . Do you know what a factory diagnostic flow chart is ? How to test electrical circuits ?
1helpful
1answer

My 2007 Toyota isis iaz.read code P0191

Anon, Trouble code P0191, You may need a good tech. with scan tool to read and test system.
  • Fuel Rail Pressure Sensor Circuit Range/Performance,computer see's signal from the Fuel Rail Pressure Sensor and/or its circuit is sending erratic readings, indicating a fuel pressure condition that is abnormal. Problems could be out of gas, leaking fuel, faulty fuel pressure sensor, bad wire or plug in circuit,fuel pressure regulator, the fuel pump could be faulty also. Check the attached links,instruction and guides, Good luck
    "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
P0191 OBD II Trouble Code

P0191 Fuel Rail Pressure Sensor Circuit Range Performance

RAV4 2001 Trouble Code p0191 probable solution Toyota Nation Forum Toyota...

code P0191 2007 Toyota Google Search
1helpful
1answer

I have a 2006 Ford escape need help repairing intermitting P0191 code problems

P0191 - Fuel Rail Pressure Sensor A Circuit Range/Performance , Description: The comprehensive component monitor (CCM) checks the fuel rail pressure (FRP) sensor for an acceptable fuel pressure. The test fails when the fuel pressure falls below or exceeds a minimum/maximum calibrated value for a calibrated period of time. Possible Causes:
  • High fuel pressure
  • Low fuel pressure
  • Damaged FRP sensor
  • Excessive resistance in the circuit
  • Vacuum leaks
  • Low or no fuel
Diagnostic Aids: A FRP PID value during key ON, engine running of 138 kPa (20 psi) to 413 kPa (60 psi) is acceptable. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to Pinpoint Test DD .
0helpful
1answer

How do I fix code P0191 on 2013 duramax?

code p0191 refers to rail pressure(FRP) sensor--range/performance problem===causes-- wiring-- FRP sensor.
check for air in the fuel system after a filter change
check FRP sensor and wiring is connected properly.
0helpful
1answer

Question about a P0191 DTC on a 2004 Ford Explorer XLT

What repairs can fix the P0191 code?

  • Replacing fuel filter(s) or fuel pump
  • Replacing the fuel pressure regulator
  • Repairing any broken, frayed, or shorted wires that lead to the fuel pressure sensor
  • Repairing corroded connector to the fuel pressure sensor
  • Replacing fuel pressure sensor
  • Repairing any vacuum leaks in the engine

    Many times this error will also occur if there already exists fuel/air problems, like your previous code 2106 means there are one or more components in your car's intake/exhaus/air/injection systems that is having serious problems
2helpful
2answers

Ford taurus 2002 diagnostic says p0191 and p1506 light comes on check engine car runs then after time it will die off. had a button in back trunk to switch if car gets bump thought might be cause started...

Hello! the P1506 is indicating a defective Idle Air Control (IAC) valve,,,P0191 is indicating a fuel rail pressure sensor (FRPS) fault...I suspect a cause and effect on the two codes...
Cause= IAC...Effect= FRPS....See photo below...Remove and clean with throttle body spray cleaner before you purchase a new one...It may only be blocked with carbon...Guru..Saailer



saailer_146.jpgACDELCO Part # 2171810 Cost $70

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

1helpful
1answer

We have codes P0171, P0191, P0174, P2198. The car is sluggish on acceleration and the engine will sometimes die. Sometimes runs fine and then it will have a gallop during acceleration. Cleared check...

I would start by looking for a broken vacuum hoses. That would cause 2 of the codes. The other 2198 is stating that the o2 is stuck rich. Look for the vacuum leak and let me know when you have that or if you do not find one.
2helpful
1answer

Check engine light is on. OBD reads p0191 &

Replacement of the fuel pump would be the case here,unless the fuel filter needs to be changed.To find out,remove the fuel filter,and blow threw it with your mouth,kinda tast bad but it will tell you if the fuel filter is restricted.You should be able to blow threw it easy.
3helpful
1answer

Check engine light

Go here and it will tell you how to get your codes. Actually on an 06 you can just turn the ignition on and off 3 times (dont crank the engine) and the codes will show up on your odometer. But here are all the codes. PS you can get a manual on pdftown.com for free too.

P0191 Fuel Rail Pressure Sensor Circuit Performance

http://www.allpar.com/fix/computer-codes.html
Not finding what you are looking for?

1,218 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...