Removal & Installation
Specific to:
Hyundai Entourage 2007-2008
Specific to:
Fig. Remove the crash pad lower panel (A)
Fig. Remove the crash fascia panel (B)
how to replace ignition switch on a hyundai tiburo - 0996b43f80e41e88.jpg"h_mi">Remove the screw with the ignition in the ON position (IG ON) and disconnect the 6P connector.
Fig. Remove the ignition switch (A)
Hyundai Accent 2006-2008
Hyundai Azera 2006-2008
Hyundai Elantra 2006-2008
Hyundai Sonata 2006-2008
Hyundai Tiburon 2006-2008
The negative battery terminalThe crash pad lower panelThe ignition switch after loosening the screw with IG ON and disconnecting the 6P connector
SOURCE: How do I remove the ignition switch from a 1997
You don't.. you replace it. best leave this to the professionals
SOURCE: overheat 2001 hyundai tiburon
Only 2 parts remaining are the thermostat and waterpump. Always start with the thermostat when diagnosing an overheating problem. If the car is overheating constantly under all conditions and coolant is backing up into the reservoir, it's very likely to be the thermostat. If it only overheats at low speed or idling, it's more likely the waterpump.
SOURCE: 2005 Hyundai Tiburon, ignition switch won't turn.
does the steering wheel lock, does the tranny lock??? try working the steering wheel quickly back and forth, and or jiggling the shifter...good luck
SOURCE: 2004 Tiburon: where is the 04 hyundai tiburon 2nd fuse box?...
Hi There,
You will find the second fuse box on the right hand side of the steering wheel (australian - left hand side if in america) located underneath the power "mirrors" button. Follow the side power "mirrors" button down until you reach a false wall, unfasten this. another word for this is the "fascia"
Hope this helps
Cheers Buckaroo,
Chris
2,120 views
Usually answered in minutes!
×