Bmw trouble codes p1050 and p1062 - 2007 BMW Z4 2.0i

this is the throttle sensor the air intake feed come into this, its different on some models, part number is on the unit match part number with replacement.

P1050 - Bank 1 Camshaft Adjustment Valve 1 Open Circuit https://www.autocodes.com/p1050.html

First thing you need to do is to have the car scanned with a engine malfunction light scanner . then you'll get a engine trouble code.

depending on what is the code then search on google for bmw 328i 1999 engine trouble code list and repair procedures.


to find out what codes meens go to that link http://www.obd-codes.com/trouble_codes/bmw/.

Hi
this is the Variable valve timing (VVT), bank 1 - limp-home mode - full stroke position not reached P1062 and the P1050 is the VVT control unit itself, try checking the connections to it make sure they are secure, if all looks good, then you might have to change the unit as this will keep making the vehicle go into limp mode.
hope that helps

Bank 2 sensor 3 [HOS2] .

try looking on that website for infos.


http://www.obd-codes.com/trouble_codes/


hope to help.

P1050 means BMW VVT Control Circuit Bank 1 Electrical Malfunction.

you could have bad wires, bad plugs, or bad ignition control module

you should probably take it to a bmw dealership or other qualified shop

MMM THOSE ARE WEIRD CODES,THEY SHOULD BE P 0000 ETC... THE ONLY THING CLOSE WAS CODE 61 ( I FOUND CODE 62 WHICH IS MISSFIRE )
ALSO CODE 8 IS A MISSFIRE DETECTED WITH LOW FUEL
TRY ANOTHER SCAN TOOL