Question about 1998 Toyota Camry

3 Answers

How do i program a 1998 toyota camry remote? - 1998 Toyota Camry

Posted by Anonymous on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Loyalty:

    Visited the website for 30 consecutive days.

  • Expert
  • 83 Answers

Great news, your 1998 Toyota Camry Key Fob is self programmable. Below are the programming instructions. Be patient, it might take you a few times to get this right. It is all about timing.

Most remotes can be self-programmed. If this procedure does not work, you must have your remote programmed by a professional automotive locksmith or dealership.

how do i program a 1998 toyota camry remote? - 99_toy-twtvuxnncjhsrpzvtcoi235v-5-0.jpg
Obtain all remote transmitters for this vehicle.
1. Insert key into ignition and turn ignition switch to ON position.

2. Locate the ECU (Engine Control Unit) and press and hold the ECU PROGRAMMING button for 3 seconds. The ECU will be located under one of the front two seats, the trunk, or under the dashboard on the drivers side. You will need a small pointy object like a pen to depress the ECU button. After pressing the ECU button for three seconds, you will see the STATUS MONITOR LED turn on for 5 seconds. Vehicle is now in programming mode.

3. Press and release the top button on the remote. The STATUS MONITOR LED will turn off. A chirp will be heard as well as one flash of the exterior lights.

4. Turn off the ignition. Programming is now complete, test remotes for proper programming.

Posted on Sep 11, 2018

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Toyota Expert
  • 235 Answers

Google it and print 10 steps
easy

Posted on Aug 04, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 776 Answers

There are lots of confusing instruction on the net - a dealer is the best bet - ask the price BEFORE you let them do it. Some will do it for free and some dealers want $100 (especially if it is not a Toyota brand remote). Also, most Camry did not have remotes from the factory 1997 - 2001) - only the XLE models. If no factory remote, then no radio for the remote inside the car and it won't help.

Posted on Jul 31, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: 1998 toyota camry interior dome light replacement

Look closely at the cover. You will see a small slot. Insert a small flat blade screwdriver, and pry it off. Very easy..

Posted on Nov 10, 2008

  • 1861 Answers

SOURCE: Broken spring on the gas fuel tank door on Toyota ''Camry'' 1998

Go to your nearest Toyota dealer. Purchase this part number: 77360-22020; approx 4 dollars.

Open the fuel door. Being careful, remove the leftover plastic that is hooked by the door hinge. Insert the new spring assembly under the slot, and press it in until it clicks into place. Very easy to do.
Hope this helps, and thanks for choosing FixYa.

Posted on Nov 21, 2008

  • 1861 Answers

SOURCE: 1998 toyota camry V6

P0420 indicates you have a catalyst efficiency issue; replacement of the Air-Fuel Sensor should take care of that;
The P0441, P0446 and (I assume P0440); you said 446 twice, indicates a faulty or loose fuel cap; it is not sealing properly.
Please feel free to respond to me if you have any further questions.
A FixYa rating from you regarding my assistance would be greatly appreciated.

Posted on Dec 27, 2008

  • 1 Answer

SOURCE: power steering rack 1998 toyota camry

I have a power steering leak on my 1998 Toyota Camry.  I have been using over the counter stop leaking fluids, but it has not helped.  It leaks more during the cold weather as oppose to hot weather. Deme 

Posted on Jan 27, 2009

  • 318 Answers

SOURCE: 1998 toyota camry , 2 codes, p0171. + p1133

P0171 lean code. Clean the maf sensor. A f sensor is inthe exhaust pipe.

Posted on Oct 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Toyota Camry quit at a stop light and won't start.


407ec0c6-6132-455d-929c-e986d8cbd072.png
Good morning Sir,

I have problem with the1998 (2.2) toyota camry.
The car was idle for weekend (2 days) & the engine fail to start on Monday. The attahment show the indicator "blinking" in the dash panel.

Need help. Thanks.

Apr 18, 2013 | 1998 Toyota Camry

1 Answer

Need battery for remote 1998 Camry


If the remote is the type with a small screw in it, the batteries can be sourced at a jewelers, camera shop or pharmacy. If it has no screw in it, and is the single button type, unfortunately they are a sealed remote, and you need to get a new one and code it to the system. They aren't too expensive, around $70. Any Toyota dealership should be able to do this for you, it is a sequence of opening and shutting the drivers door and turning the ignition on and off.

Mar 02, 2011 | 1998 Toyota Camry

1 Answer

How to programme a clone keyless remote for 95 Toyota camry XLE Thanks


1 turn ignition to "on"
2 insert original remote into reader located in the glovebox
3 red security light should come on solid
4 insert new remote into reader straight after taking out old remote
5 new remote is now programmed

Jan 19, 2011 | 1995 Toyota Camry

1 Answer

Firing order diagram for 98 toyota camry


1998 Toyota Camry 2.2 liter DOHC L4 (5S-FE)

85f8d42.gif



1998 Toyota Camry CE Sedan 3.0 liter DOHC V-6 (1MZ-FE)

bd2a436.gif


Hope helps (remember comment and rates this).

Jul 22, 2010 | 1998 Toyota Camry

Not finding what you are looking for?
1998 Toyota Camry Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...