What are the timing setting marks for a 2004 forester 2.5X ?

This is OK just set the marks as you stated. The drivers side acts as if it were spring loaded so you have to work it to the right to get to the mark. Good Luck Friend.

Try unplugging the MAF sensor, the check engine light will come on but the engine should run almost normally. If this is the case replace the MAF sensor. MAF's seldom set fault codes.

Timing Belt & Sprockets - AutoZone

www.autozone.com/...Forester.../_/P-0996b43f8037f34f
AutoZoneWhen the timing belt is removed, the camshafts are positioned so that none of the ...Before removing the timing belt, turn the crankshaft sprocket until all of the ... If the directional arrow and alignment marks on the timing belt are faded, and ... 60mm (h), otherwise it will be damaged beyond-1999-2004 SOHC engine shown.

[PDF]Technician Reference Booklet - PhantomOtaku.com

www.phantomotaku.com/SVX/011822-MSA5P0631C.pdf

Dec 6, 2009 - driven Camshafts give the new engine a look ... before the manifold canbe removed. ... Turn engine clockwise to rotate it until the key ..... rotate the crankshaft90° clockwise. This will position the left timing chain and the black link ..... when the oil pressure ports align the pressure is reapplied or released ..

Check your work make sure connectors are plugged in. Make sure timing marks are lined up right.

It should be located behind the front grill but ahead of the radiator.

Subaru Forester


for the easy solution download the pdf file

2004 Subaru Forester


to know your answer visit the above link

SUBARU FORESTER SERVICE REPAIR MANUAL 1993 2004 DOWNLOAD


get your car fix right now

SUBARU FORESTER SERVICE REPAIR MANUAL 1993 2004 DOWNLOAD


for the easy solution download the pdf file

check thr timing gears as they all are marked they line up with arrows on the block make dure the engine is at top dead centre once the belt is on turn over by HAND to make sure you have lined them up ok ore you WILL BEND VALVES and cause big $$$$$$$$ damage if in doubt get back to me Lindz