Location of engine number identification?

The vehicle identification number (VIN) is located on the left side rear of the engine block (1) and is typically a nine digit number stamped or laser-etched onto the engine at the vehicle assembly plant.

For more details with diagram,click the link below:
https://fexya.blogspot.com/2021/05/engines-vin-or-serial-number.html

THIS WILL HELP.THANKS

Jan, I am not familiar with that model, I recommend you return to the shop that changed engine for you and have them find and record the engine # for you.Check the attached links they may help you find engine #. Good luck. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Peugeot 206 VIN Number Location Vehicle Identification chassis number...
2013 Peugeot 4008 SUV engine number location Google Search

to many engines out there to give a good answer

try this for now
nonspecific downloadble document on engine number locations

[DOC]Engine Number Location Chart No 2. - RVCS rvcs-prodweb.dot.gov.au/vehicle%20identification%20and%20engine%20number%2...

VSS VEHICLE IDENTIFICATION AND ENGINE NUMBER LOCATION CHART SYSTEM. GRIDLOCATION CHARTS ... Chassis Number Location Chart No 9.

I don't think you'll find a VIN (Vehicle Identification Number) on the engine at all (although I could be wrong).
VIN is usually attached on left side (as sitting inside car) on top of firewall - many cars have a visible area near lower edge of windshield with VIN visible).

If you still have the original engine in the vehicle the engine can be identified by the 8th digit in the Vehicle Identifiaction Number (VIN) which is located on the dash at the bottom left of the windshield (best viewed from outside of the vehicle.
The letters N or P indicate a 5.0 liter engine.
The letter X indicates a 4.0 liter V-6 engine.

I hope this helps.

Just follow the upper radiator hose from the radiator to the engine, where is connects to the engine remove the hose and the cover under it to expose the T-Stat. Drain about 1/2 gallon of coolant out before you start work. Bleed the air from the cooling system (refer to service manual for this year and engine type) after the T-Stat is replaced to prevent poss overheating.

Click over pic for zoom...



Fig. 1: Location of the engine identification number-2.2L engine






Fig. 2: Location of the engine identification number-4.3L engine


Hope helps (remember rated this).

How to read a VIN
1st character- Identifies the country in which the vehicle was manufactured.
For example: U.S.A.(1or 4), Canada(2), Mexico(3), Japan(J), Korea(K), England(S), Germany(W), Italy(Z)
2nd character- Identifies the manufacturer. For example; Audi(A),
BMW(B), Buick(4), Cadillac(6), Chevrolet(1), Chrysler(C), Dodge(B),
Ford(F), GM Canada(7), General Motors(G), Honda(H), Jaquar(A), Lincoln(L), Mercedes Benz(D), Mercury(M), Nissan(N), Oldsmobile(3), Pontiac(2or5), Plymouth(P), Saturn(8), Toyota(T), VW(V), Volvo(V).
3rd character- Identifies vehicle type or manufacturing division.
4th to 8th characters- VDS - Vehicle Descriptor Section. These 5 characters occupy positions 4 through 8 of the VIN and may be used by the manufacturer to identify attributes of the vehicle. Identifies vehicle features such as body style, engine type, model, series, etc.
9th Character - The check digit "character or digit 9" in the sequence of a vehicle identification number (VIN) built beginning with model year 1981 (when the 17 character digit format was established) can best be described as identifying the VIN accuracy.
A check digit shall be part of each vin (since 1981) and shall appear in position
nine (9) of the VIN on the vehicle and on any transfer documents containing
the vin prepared by the manufacturer to be given to the first owner for purposes
other than resale. Thus, the VINs of any two vehicles manufactured within a 30
year period shall not be identical. The check digit means a single number or letter
"x" used to verify the accuracy of the transcription of the vehicle identification
number.
After all other characters in the VIN have been determined by the manufacturer
the check digit is calculated by carrying out a mathematical computation
specified. This is based on vin position, sample vin, assigned value code,
weight factor and multiply assigned value times weight factors. The values are added and the total is divided by 11. The remainder is the check digit number.
The correct numeric remainder - zero through nine (0-9) will appear.
However, if the remainder is 10 the letter "X" is used to designate the check
digit value/number.
10th character- Identifies the model year. For example: 1988(J), 1989(K), 1990(L), 1991(M), 1992(N), 1993(P), 1994(R), 1995(S), 1996(T),
1997(V), 1998(W), 1999(X), 2000(Y)------2001(1), 2002(2), 2003(3)
11th character- Identifies the assembly plant for the vehicle.
12th to 17th characters- VIS - Vehicle Identifier Section. The last 8 characters of the VIN are used for the identification a of specific vehicle. The last four characters shall always be numeric. Identifies the sequence of the vehicle for production as it rolled off the manufacturers assembly line.

Vehicle Identification Numbers (VINs) are used to uniquely identify motor vehicles. Prior to 1980 there was not an accepted standard for these numbers, so different manufacturers used different formats. Modern day VINs consist of 17 characters that do not include the letters I, O or Q.

Engine & Model Year Identification
Check this...








Also engine identification can take place using various methods. The VIN, described earlier in this section, contains a code identifying the engine which was originally installed in the vehicle. In most cases, this should be sufficient for determining the engine with which your car is currently equipped. But, some older vehicles may have had the engine replaced or changed by a previous owner. If this is the case, the first step in identification is to locate an engine serial number and code which is stamped on the block or located on adhesive labels that may be present on valve covers or other engine components.



Fig. 2.2L engine date code and partial VIN location



Fig. Engine partial VIN location- 2.4L Engines



Fig. 2.4L engine code label location

More details in autozone.com (free register). I hope help you with this (remember rated this help) Good luck.

Fuel Filter is located behind the heat shield,underneath the vehicle, adjacent to the transmission support crossmember.

(left rear of the engine compartment on the firewall)