SOURCE: replaced battery, a few days later engine light
please remove the negative battery terminal wait for 15seconds then return! start the engine! you can get me on+2540722528209
SOURCE: how to get the vsc off my 2000 gs 300 lexus
there is a switch under the dash to turn the vsc on and off. its on the driver side
SOURCE: 2000 Lexus RX 300 - VSC Light comes on and brake pulsation
you most likely have an "air gap" or "tone ring" problem with one of your sensors or tone rings. i would suggest letting a technician diagnos which problem it is, as it is a diagnosis that requires some experience.
SOURCE: i have the same problem like everyone lexus rx 300
As the car ages the 02 sensors can clog and need replacing, however check your gas cap first to be sure it is tightly secured.
If they are fouled, the 02 sensors will trigger the check engine lights and vsc lights to come on. An exhaust leak can also give a misread. The problem code will identify the suspect are and depending on location this can be as easy a fix as changing a spark plug, but you will have to find someone with a code reading device to determine what area is the problem.
On occaison you will also have a sticking throttle body mechanism at the back end of the large rubber sorkle under the hood. This area has a butter fly valve like an old carb which can stick and cause idling issues as well. You can sremove the snorkel and look inside to see the mechanism, then spray clean with carb cleaner while idling.
Changing one 02 sensor may cause the VSC light to come on again as the system readjust your fuel ratio mixture. Be patient and pay attention to the readings before changing all the sensors randomly.
SOURCE: Abs light is orange and let up and the VSC is red
check your tire pressures and then press the tire pressure monitoring recalibrate button under your steering wheel on the lower instrument panel.
415 views
Usually answered in minutes!
×