SOURCE: spare tire
I have an Infinit QX56 and it uses the same tool to release the spare from under the rear of the SUV/lift gate. All you need to do is open the storage compartment in the rear hatch and get out the lug wrench bag out that has the tools. There is a long tool that looks like a bar with a "T" at the end. This will go into a hole in the rear bumper under the hatch. Then attach the extention tool and finaly lug wrench to the end with the hole in it. Rotate until you feel it catch, then rotate counter clockwise to lower the tire. Once it hits the floor, release a bit more tension so you can manuver the chain and holder out from the center of the rim. Lastly do these steps in reverse (rotate clockwise) to put the tire back under. Hope this helps!
Dev
SOURCE: Need rims for an 86 Nissan 300 ZX, just to move
Hi myrar I have 4 damn near new tires on rims that came off a 1986-87 late production 200sx...205/60-15 inch rims with trim rings and center hub caps and I have 4 locking lugs with the key for these performance tires excellent condition, i was restoring the car but had to abandon the project for a few reasons! 401 453 3045 or email me at [email protected] me a serious offer and we will work out the details!
SOURCE: drive shaft housing location 96 nissan sx
go to www. automecanico.com translate the web to english and search for your requirements.
God bless you
101 views
Usually answered in minutes!
×