At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It cuts power to the fuel pump when the car suffers crash damage.
The inertia switch is located in the footwell behind the trim on the right-hand side of the vehicle, forward of the front door post, below the fascia. A finger access hole allows the driver to reset the switch.
The inertia fuel shutoff switch is located behind the driver side scuff panel. An access hole is in the scuff panel to access and reset the fuel shutoff switch.
NOTE: In the reset position, the button can be pressed an additional 1.59 mm (0.0625 inch) against a spring. This is a normal condition.
To reset the inertia fuel shutoff switch , press button on top of inertia fuel shutoff switch .
i dont think GM usesinertia switch thats ford. but you could check the gas pump relay, or a fuse for example, the inertia switch on fords is in the trunk or close to drivers front door
You likely tripped the Fuel Shut-Off Inertia Switch.
The inertia switch is located behind the trim on the right-hand
side of the vehicle, forward of the front door post, below the
fascia. Pull open the small panel in the trim to reset the switch.
Resetting the switch
CAUTION !!!:
To avoid the possibility of fire or personal injury, do not
reset the inertia switch if you see or smell fuel.
If no fuel leak is apparent, reset the inertia switch as follows:
Press the button!
If the switch was activated by the accident, you should feel it "click" when you reset it by pushing it.
my 1996 nissan quest, i do not know Left kick panel near the hood release handle look for a hole left side just ahead the left door push down to reset the inertia switch. Good luck carprog
If you're talking about the Inertia switch, the following may help:
Inertia Switch GENERAL INFORMATION
This switch shuts off the fuel pump in the event of a collision. Once the switch has been tripped, it must be reset manually in order to start the engine.
The inertia switch is located on the toe-board, to the right of the transmission hump, in the passenger-side footwell.
×