Just want to pull the fuse out but on my fuse cover all there is are numbers its only used to carry an atv but got caught up and tug on a wire now got no brakes on 1 wheel... i dont need abs to be workin
Even when you remove the ABS, your break won't work on the one wheel. You should look for the real cause of the break problem, not start unplugging fuses. When you disable the ABS, the only thing that happens is the wheels can block, while using the breaks. If already one wheel does not break, you run in even more trouble then before.
SOURCE: 2000 Mazda 626 brake lights
It may be the switch on the brake pedal, it should be located on top of the brake pedal arn.
SOURCE: need to know how to reset the abs warning light, repairs have been made
The ABS light will stay on only when a problem exists. Once repairs have been completed and no problems exist the ABS light will go off on it's own. Take the car back to where you had the work done and have them fix it. It shouldn't cost you anything. If the ABS light was not "on" when you took the car to them, DO NOT let them charge you to fix it. They caused the problem. They can fix it. Good luck. Hope this is helpful.
SOURCE: witch wires do i use to hook up an after market cd player
Here is the diagram in words as found at
http://www.modifiedlife.com/2001-mazda-millenia-car-stereo-wiring-diagram/
Car Radio Battery Constant 12v+ Wire: Red/Black
Car Radio Accessory Switched 12v+ Wire: Blue
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Green/White
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 5 1/4′
Car Audio Front Speakers Location: Doors
Left Front Speaker Positive Wire (+): Yellow
Left Front Speaker Negative Wire (-): Blue
Right Front Speaker Positive Wire (+): Pink
Right Front Speaker Negative Wire (-): Purple
Car Audio Rear Speakers Size: 6′ x 9′
Car Audio Rear Speakers Location: Rear Deck
Left Rear Speaker Positive Wire (+): Green
Left Rear Speaker Negative Wire (-): Yellow/Green
Right Rear Speaker Positive Wire (+): Green/Black
Right Rear Speaker Negative Wire (-): Green/Orange
SOURCE: 2005 mazda tribute....abs problem
a speed sensor on the front,have the ABS system scaned for the codes(this will show you wich sensor is bad)
SOURCE: number 1 spark plug for 2000 Mazda MPV
The cylinder order is 1,2,3 (rear row, left-to-right) and then 4,5,6 (front row, left-to-right).
When replacing spark plug wires or plugs, it's very helpful to do one at a time to avoid connecting them incorrectly.
Hope this helps,
Sherwin
230 views
Usually answered in minutes!
×