Hyundai accent 1.5 rsi remote

SOURCE: 2002 Hyundai Accent Problem

first thing i need to know is did the timing belt break?
second is are you sure you aligned the timing marks and after the belt tensioner was tight you rechecked to make sure the timing stayed where you had it.
next step would be a compression check to if a valve was bent whenchanging the belt
i have seen this happen and this engine is an interferance engine.
later paul

SOURCE: timing belt on my 2002 hyundai accent 1.6 liter 4cyl

DID THE BELT BREAK AND THEN IT WAS CHANGED. If so then you may have bent valve. IF NOT then vehicle may be timed wrong. Here is a diagram of your timing marks, http://www.2carpros.com/car_repair_information/tec_info/2002/hyundai/accent/2002_hyundai_accent_timing_belt_diagram_marks.htm contact if you need more help. Thanks for using FIX YA

PAUL MC G

• 1280 Answers
• Posted on Sep 23, 2009

SOURCE: 2004 Hyundai Sonata door lock functions inoperable.

you have a bad relay.. the 'lock' relay.

SOURCE: 00 hyundai accent, wont start light on dash with

Could be as simple as a blown fuse for the ETACS module, but it sounds more like a problem with the anti theft immobilizer system. Does your car have remote keyless entry? And is the key you are using a factory key or one someone made? (factory key will be encased in bulky black plastic with hyundai logo) The transponder in the key might have worn out and is not talking to the car anymore. Some hyundais use the radio antenna to receive the signal, is there an antenna on the car? Is it hooked up? If it is a problem with the key and immobilizer system, It will unfortunately need towed to a dealer and reprogrammed.

SOURCE: Central locking on my Hyundai Accent no longer works

u will have to replace the celenoid so it can work normally again or just remove the celenoid and the car wont have a shift lock any more, you can also bypass the lock by pressing on the small hole on the top left side of the shifter.. hope this helps ..