SOURCE: 2001 jeep grand cherokee seat removal
i actually removed my 2 front seats very easily as a novice. There really is only i think 4 bolts that need to come out 2 in front and 2 in back. If i can remember correctly i believe it was a larger metric size. Although i dont have power seats, if you do just look for the clip connector and disengage
SOURCE: 94 Jeep Wrangler Seat Belt Installation
your jeep should have all the holes and thread nuts already installed. pull up the carpet and locate them. the two close to the center are for seat belts as are the two outside of them. the four holes that form a large square/rectangular area are for the seat. if your seat is fold and tumble type, holes on the left wheel well are for the locking mechanism. i just pulled mine out and filled the thread holes with new bolts to keep out the water and dirt. yours may have screws or plugs in them. this install is for factory type only. mike
SOURCE: 2001 Jeep Grand Cherokee which fuse controls heated seats?
Fuse # 20, located in the Junction Block (interior, drivers side). This is a ten amp fuse.
CLICK_HERE
Read the information at the above site. The TSB (technical service bulletin) may be of interest to you.
SOURCE: 94 jeep grand cherokee will not shift into overdrive
My 97 Jeep Grand Cherokee was doing the same thing. I changed the TPS ( Throttle Position Sensor) Now it is great goes into overdrive fine. It is really easy to change.
SOURCE: heated seat repair grand jeep cherokee
There was a recall that just came out for the 2001 Jeep Cherokees. Would call Chrysler first to see if you qualify for them to fix it for free. http://www.automotive.com/2001/49/jeep/grand-cherokee/recalls/19161.html
70 views
Usually answered in minutes!
×