Intake bolt torque
SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine
Head Bolts
Step one 37 ft lbs then tignten 120 degrees more
Rocker arms
Step one 11 ft lbs then tighten 90 degresss more
Upper intake
89 inch lbs
Lower intake
132 inch lbs
SOURCE: Torque Spec for '99 Chevy C1500 5.7L engine lower intake manifold
On 5.7L engines, install the bolts and torque in sequence as follows:
SOURCE: what are the torque specs for intake and head for
For 1988-1995 4.3L,5.0L and 5.7L intake manifold bolts are torqued to 35ft.lbs.Start with center bolts on each side moving out finishing with the bolts in the front of the motor and the back
SOURCE: cylinder head bolt torque chevrolet 3.4
here is the troque spec for the cylinder heads.
Cylinder Head Bolt
60 N·m
44 lb ft
95 degrees
Cylinder Head Bolt
60 N·m
44 lb ft
95 degrees
Cylinder Head Bolt
60 N·m
44 lb ft
95 degrees
first pass 44 ftlbs
second pass 95 degrees
SOURCE: What is the torque spes
For 2004 Chevrolet Truck Silverado 2500HD 4WD 6.0L SFI 8cyl, the intake manifold, throttle body, fuel injection rail, and fuel
injectors may be removed as an assembly. If not servicing the individual
components, remove the manifold as a complete assembly.
Intake manifold bolts. Tighten intake manifold bolts first pass in
sequence to 44 inch lbs. (5 Nm). Tighten intake manifold bolts final
pass in sequence to 89 inch lbs. (10 Nm).
Fig. Lower intake manifold bolt tightening sequence - 4.8L, 5.3L and 6.0L engines
Hope this helps.
92 views
Usually answered in minutes!
×