Bmw 318i e46 2002 car will run good then just shut down give it 10mins and it will start again then it could go for 200m then stop again on dionostic it shows low volt fault , volts varey on computer alternator shows 14.10 volts at jump start point and 13.98 at battrey
is it also posibel that the car don't want to start (like flatt batt) so this crank sensor is a problem? the batt is ok!is it also posibel that the car don't want to start (like flatt batt) so this crank sensor is a problem? the batt is ok!
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This means that your engines computer detects that your engine is not running as efficiently as it should. You should get your cars computer scanned and check the codes. It will give you a starting point to determine whats wrong with you car.
sounds like a engine sensor i'd guess at the crank sensor but to be sure you would need to get the OBD codes read , this will give the exact fault so wont waste money trying sensor(s) on a hit an miss basis,you can buy a code reader online not expensive just make sure it covers your vehicle make then you have a valuable diag equipment for future use
There isn't a car out there that likes to be put in drive as soon as it is started. Mine especialy. I give it at least 30 seconds to warm while I am adjusting evrything and away I go. Runs like a champ. Let it warm up for a couple of minutes from a cold start.
You need to make sure you have a good drive belt and verify that the tension is working,if all seems normal then get the alternator or the wiring to it tested.
×