What cause engine shake in the chevrolet malibu 1998

SOURCE: My 1998 Chevrolet Malibu will not go into drive

Likely you are looking at this backwards. Slipping causes a ton of heat. Slipping is caused by worn seals inside the transmission that allow pressure loss and partial application of drive clutches which then slip. Only way to fix this is a rebuild. I know this is not what you wanted to hear but that's just the way it works!!!

Mike Watson

• 474 Answers
• Posted on Feb 17, 2010

SOURCE: replace power steering pump on a 1998 chevrolet

It could be done at home if you bought the proper tool to remove and replace the pully on the pump.They do give you some sort of a tool with the new pump but I find it really weak and they brake leaving you stuck.This is why I say"If you bought the proper tool".

Testimonial: "THANKS YOU HELPED ALOT"

SOURCE: I have a 1998 Chevrolet Cavalier. Front end

You may have a bad engine support. Open the hood and inspect the engine support (the one holding the engine to the chassis). It should be made up metal with hard rubber inside. If the rubbers are cracked or missing compared to the other side, then you need to have this replaced.

SOURCE: 1998 chevrolet malibu, 6 cylinders, check engine

Take it to Autozone or advance they will check it for free and reset it. It could just be a maintenance reminder.

SOURCE: 1998 Malibu Died on hiway

IT MAY HAVE JUMP TIMING