How to change the fog light bulb for 2009 honda odyssey

Greg Bernett

• 2993 Answers
• Posted on Jul 15, 2009

SOURCE: how to change fog lights bulbs on my 2005 honda

1. Remove the fog light mounting screw.
2. Disconnect the connector from the fog light.
3. Turn the socket about 45° counterclockwise and remove it from the housing.
4. Remove the bulb from the socket.

1. Install the bulb in the socket without touching the glass with bare hands.
2. Turn the socket about 45° clockwise to install it.
3. Connect the connector to the fog light.
4. Install the fog light mounting screw.

SOURCE: replace fog light bulb for 2006 Honda Odyssey

Touring Model
Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.
Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.
Push the electrical connector onto the new bulb.
Turn on the fog lights to test the new bulb.
Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.
Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.
Hope this helps you.