How do i make the INNOVA 3120 bleed brakes on 2008 Impala

Problem with brake system. Check fluid level.

After you have manually bled the system, turn the ignition on & put the ABS module in automatic bleed mode with a scan tool. Then, just hold the pedal down. The ABS will cause the pedal to go up & down several times & will stop when bleeding is complete.

Allen wrenches usually come in a set, try 3/8.

How to flush and bleed your brake system: You don't have to flush if you don't want to but you should still know how to bleed your brakes. The following video will show you both How to bleed your brakes and How to flush your brake system. https://www.youtube.com/watch?v=n1NvtUwfRJc

Here's a link to read about your brakes. 2008 Ford Fusion Hydraulic Brake Complaints

fuses first. as always for ever. (its all electrical ,now to run engine)
and shift.
All jeeps 93 + have a thing (fear box) ASD relay.
nowing how it works and why , makes all this easy
any scan tool will tell you why. Innova 3120 (does jeeps this year)
a $100 tool
http://www.walmart.com/ip/Equus-3120-Innova-Diagnostic-Code-Scanner/14644658
with special cables for jeep , OBD1 DTC port.

the tool will tell you , what DTC failure and why ASD drops.

http://www.fixkick.com/Jeeps/ASD.html


the key on ,off trick may work
but be warned the keyone off trick does clear some spark failure codes and will not tell you the extended codes, of the factory DRB tool. so the INNOVA can be a "revelation"
id never own any jeep before 1996 , with no scan tool.
not me. first time it saves you, its now PAID FOR.
Investment grade TOOLS. if ever there was.
not $100 shop labor and no tools and guessing parts.
win.

Hi Sara,just follow the link to the repair guide.

You need brake oil

2009 and your trying to read the software ?? well do not waste your time because its encrypted so what ever you read will not be the correct code ,also chances are if you try connecting a scanner to the obdii then you invoke the vehicles immobilisor as unauthorised access ,

you should first bench blead a new master cyl before installing it on the car.