How to move seats manually on Chevy silverado?

If the bolts line up correctly. You will probably have to manually wire electricity to the seat.

Auto Repair: How to Replace a Power Seat Motor - YouTube

? 1:44
https://www.youtube.com/watch?v=EDh-0rs5Fjo
Oct 26, 2010 - Uploaded by automdvideos
Auto Repair: How to Replace a Power Seat Motor ... 2007 - 2008 Ford Expedition/Lincoln Navigator Driver Bottom Install Video ...2003-2006 Chevy/GMC Seat Cover Install 1 of 3 - eBay Ready ...2000 Ford Explorer Front Seat Track Stuck Motor Repair - Duration: 4:39. by cubmancan 4,959 views. 4:39.
Drivers seat is dead! No power seat or heat. - TheDieselGarage.comwww.thedieselgarage.com/.../96465-drivers-seat-dead-no-power-seat-hea...Mar 22, 2010 - 2003-2005 Chevrolet Avalanche, Silverado, Suburban, Tahoe 2003-2005.... Power seat on driver side didn't work.....passenger did! Neither ...DANG electric seat ' Chevy Truck Forum ' GM Truck Clubwww.gmtruckclub.com/forum/threads/dang-electric-seat.2990/Apr 27, 2006 - 10 posts - ‎7 authors'03 Tahoe My driver seat just stopped, of corse not where I need it, the ... I have a 2003Tahoe and both heated seats are not working. ... with my seat heater on the drivers seat in my 03 Avalanche, it turns ... The driver's side on my Silverado gets way warmer than the passenger side. ... Frozen New Member.Power Seat Problems?? - Tahoe Forum - Che

Before you do any of the expensive things disconnect and reconnect the wiring to the seat I had the same exact problem with my 2009 Chevy Impala and was ready to take it to the dealer when I disconnected the power cables to it and reconnected them I found that one of the Harnesses was loose and the problem was solved

Probablyt because the little wire cable that activates the release mechanisms on both sliders is broken, and therefor only allowing only one slider to release when you activate the seat adjusting lever, and leaving the other one engaged, preventing you from moving your seat. This is relatively easy to diagnose, if you know what to look for... Just try to see what all moves when you press your lever. See if there is a wire cable that is activated anywhere under your seat it should be relativley close to your lever and run across the open space to the opposite slider.

Check wiring under the seat. Frequent habit of pushing things under the seat such as flashlights and tools etc and moving the seat forward and back sometimes pulls wires or breaks them.

hi there should be some bolts behind the side covers of seats they maybe loose?? or are your actual tracks/rails sliding?

This sounds like something is broken. When the motor stops, there is a gear that is jambed. So, if you are moving, you need to take it apart and look for broken cables or damaged gears.

do it because it is a safety issue....

depending on what year truck it is, there is a 40-60amp maxi fuse in the underhood fuse block that can also blow, the harnesses get stuck on the backside of the seat tracks and blow the underhood fuses.

the seats run of a circuit breaker which is in the fuse box

The problem is the track. You can find replacement tracks on EBAY for about 180.00 for driver side.