4hk1
Our Hombre used this engine.
The LK5 (also called the Vortec 2800) is a 2,770 cc (169 cu in) straight-4 DOHC engine,
Applications include the 2000 Isuzu NPR350A
The 4HK1-TCN is a direct injection SOHC 16V turbocharged engine of 5.2L capacity.
DIESEL
I googled for you and 3rd hit , is
http://www.nationaltruckspares.com.au/P_Isuzu-Isuzu-4HK1-NPR75-Etc-Torque-Specification-.aspx?id=3650
see the spec there. in nM>?
it states
M14 bolts 98 nm then 147 nm then + between 30 to 60 Degrees
M10 bolts 38 nm
SOURCE: Torque spec for flywheel bolt: Isuzu 2.5 diesel engine
normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.
SOURCE: what is the 98 isuzu rodeo head bolt torque
joyce, there are different specs for sohc and dohc engines. my advice is to get a Haynes manual from the auto parts store.
doug
SOURCE: what are the head bolt torque specs for a 93 isuzu
The specs.Are the m8 bolts 15 ft.lbs and the m11 bolts 47 ft.lbs.note:The m11 bolts cannot be reused and no oil on threads.
SOURCE: torque settings for a holden rodeo 3.5 ra. Head
stage 1 = 29Nm(21 lb ft/3.0 kg-m)
final = 64Nm(47 lb ft/6.5kg-m)
do not reuse head bolts or apply any lubricant to the bolts. Do up bolts in following order for each head.
6 1 3 7
front
5 2 4 8
SOURCE: what is the cylinder head bolts torque specs for
ISUZU 2.3 137 4ZD1 86-95 43 FT/LBS 72 FT/LBS 58, 72 FT/LBS
ISUZU 2.3 137 4ZD1 85-87 43 FT/LBS 72 FT/LBS 58, 72 FT/LBS
http://www.aera.org/downloads/Torque3.pdf
816 views
Usually answered in minutes!
×