2006 Volkswagen Passat Logo

Related Topics:

A
Anonymous Posted on Jul 06, 2014

2014 passat valet key not working - 2006 Volkswagen Passat

1 Related Answer

elix0411

Jose Cada

  • 3530 Answers
  • Posted on Jan 19, 2011

SOURCE: My VW Passat, 02, valet

Welcome to Fixya

You might be experiencing three problems here.

1) A bad key/lock: It is not likely that the tumblers in the lock have worn down but it is possible that the lock is dirty or is not lubricated right. Try spraying WD-40 into the lock and on the locking mechanism that actually locks the door (the claw that hold the door shut)
2) You have a bad linkage. Inside the door everything is attached and at times it comes apart or dislodged. Sometimes you can have a plastic retaining piece or or attaching piece that has become brittle. You can take off the door panel and get a good idea of how thing work by moving the inside handle or using the power locks. If every thing is connected in the linkage then...
3) You have a bad actuator. This is the actual electronic piece that locks and unlocks the door. It is usually on the inside left bottom (if looking from the inside). It can wear out and allow certain parts of the lock to work (ie key less entry, inside door handle, power locks) while giving difficulties to other part (ie the key)

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2012 Volkswagen Passat. Which fuse is for the cargo light on it please.

It has hundreds of fuses and none marked 'cargo' or 'trunk'.

Volkswagen Passat B7 (2011-2015) fuses and relays

https://fuse-box.info > volkswagen > volkswagen-passat...

Here you will find fuse box diagrams of Volkswagen Passat 2011, 2012, 2013, 2014 and 2015, get information about the location of the fuse panels inside the ...

Fuses and relays Volkswagen Passat B7, 2010 - 2015

https://car-box.info > fuses-and-relays-volkswagen-pass...

Jan 27, 2021 - Fuse box diagrams for Volkswagen Passat (B7; 2010, 2011, 2012, 2013, 2014, 2015 model year). Photos, layout and assigment of electrical ...
2: Glow plug control unit (457)
4: Low power relay (53)
1: Starter relay 1 (643) - only for vehicles with

..
0helpful
1answer

Only have 1 key for the ignition,doors are locked and won't open. Please help!

Car key won't work on one door?

forum.mrmoneymustache.com/ask-a.../car-key-won't-work-on-one-door...

Nov 25, 2014 - 6 posts - ‎5 authors
My car key goes into the lock on my driver's side door, but won't turn at all. It works fine in the trunk and passenger side, but all of a sudden, the driver's door won't open.... $100 for just a new lock cylinder from the auto parts store) and that ... It meant I had to have two keys, 1 for the doors, 1 for the ignition.

Lost my master key, have spare but won't open doors. ' Tacoma World

www.tacomaworld.com > ... > 2nd Gen. Tacomas (2005-2015)
You have the "valet" key that won't open your doors. ... and 1 keyfob. a friend game me another keyfob and i programmed it. but i only have 1 key. ..... There is no wear on the lock on the doors but you will see wear on the key and the ignition.

How to open a VW door that won't open from inside OR ...

? 4:25
https://www.youtube.com/watch?v=Fy3KbKkAZZ0
Nov 26, 2014 - Uploaded by BMAC VAGS
0helpful
1answer
0helpful
1answer

How do I use the volkswagen valet key

Instructions
    • 1Get into your vehicle. Insert your valet key into the ignition and turn the key as far as you can in the "On" position without cranking the engine.
      2
    • Get out of the car and close the door behind you, leaving the valet key in the ignition. Place your regular car key in the driver's door and turn the key to lock the car manually.

    • 3.
      Remove the key from the driver's door. Push the "Unlock" button on your key fob twice.
    • 4Enter your car, turn the valet key to the "Off" position and remove it from the ignition. Your valet key is now programmed.
0helpful
1answer

Is there anyway of telling by the vin number of the veichle if there was a vallet key made before or after purchase.

ALL VW group product come with two remotes and one valet key when new.(the valet key does not operate the glovebox/trunk).there is no way of knowing how many keys were cut after delivery.and sometimes the car will not recognise a key because its been dropped/left on top a television etc.they all have a transponder inbuilt,which is coded to the car.and should be recoded at the same time,as the computer only gives a dealer 30 mins to code them.
0helpful
1answer
5helpful
3answers

My wife is stuck at the airport. the key fob on

On the driver's side door handle, there is a cap covering the key hole on the right side. On the bottom of the cap is a small ****. Use the valet key to pry it up and off. Then you may open the door, most likely sounding the alarm, so you will need to insert the remote in the ignition to stop the NOISE!!!! Hope this helps. This is how I lock my remote away when I go somewhere to run.
0helpful
1answer

Jaguar XK8 Valet key not working correctly

I have seen this before, each time i have seen it i have to reprogram the valet key. This needs to be dont at the dealership, make sure you bring the master key otherwise they cant program the valet key.
Not finding what you are looking for?

228 views

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Bradley
Bradley

Level 2 Expert

105 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...