Firing order of 1995 Pontiac Boonville - 1995 Pontiac Bonneville

SOURCE: firing order, 1990 Pontiac Grand am 2.5 l, 4 cyl

Its 1342 or 1432 To guarantee correct firing order take plugs out and place your finger/thumb over the plug hole so you can feel the compression cycle.Have some one flick the key on and off slowly .As soon as No 1 has done its compression cycle the next cylinder to compress will be in the firing order.You only need to test 2 clinders to tell you which one of the two firing orders ive given you.good luck and let me know how it goes

Marvin

• 85242 Answers
• Posted on Jun 19, 2009

SOURCE: fire order for 1995 pontiac grand prix

u have 2 engines that may be in car, see links for both set ups.
3.4L
http://autorepair.about.com/library/firing_orders/bl-fo-8203.htm
3.1L
http://autorepair.about.com/library/firing_orders/bl-fo-8202.htm

SOURCE: I need a firing order diagram for 1995 Pontiac

Not a lot of background info in your question....if the key to your car had an integrated chip than it needs to be programmed to work with your car.

SOURCE: 1984 pontiac bonnerville plug firing order photo

Hi,
I don't know your engine size, but the link below is a picture of the GM small block firing order with distributor.
The firing order, which should be cast into the intake manifold, for the chevy small block V8 is 1-8-4-3-6-5-7-2. The firing order is the numerical sequence in which the spark plugs are fired. The insertion position of each spark plug wire around the circumference of the distributor cap can be found according to a clock face. The insertion sequence determines the firing order. The firing order is followed clockwise around the distributor cap starting from the 6:30 position with the 6:30 position being the number one cylinder spark plug wire.

http://www.classiccarauto.com/impala/how_to/images/distributor.png

Hope this helps...

Testimonial: "thanks this helps me out some."

SOURCE: I need 3.1 firing order daigram

I apologize for the late response...Due to the bad economic situation this site has had a substantial (+50%) increase in the number of questions being asked in the last four months.

For the 3.1L:
Firing Order:
1-2-3-4-5-6

Cylinders:
1-----3-----5
2-----4-----6
(front of vehicle)

Ignition Connections:
| 5 - 2 | | 3 - 6 | | 4 - 1 |
(front of vehicle)


Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!