I have a clinking noise that sounds like a bolt rolling inside the torque converter especially when i push on the gas so I replaced it but it is still making the noise any ideas
SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine
Head Bolts
Step one 37 ft lbs then tignten 120 degrees more
Rocker arms
Step one 11 ft lbs then tighten 90 degresss more
Upper intake
89 inch lbs
Lower intake
132 inch lbs
SOURCE: transfer case making roaring rattling sound
it's possible you might need to just change the trans case fluid.... it's a pretty simple task, i usually do all the small minor work first before i take it to a dealer to fix.... if they said you need a new trans case, but didn't tell you why, more than likely there might be something you could do yourself to make it better... those service men have been working around vehicles long enough, they should be able to tell you exactly what's wrong!
i would also do a tranny fluid change to... some of the noise could be coming from there too -- when you change either fluid, add a little lucas transmission fluid stabilizer, it helps alot with seals and makes the fluid stick to the gears better...
SOURCE: what is the torque specifications on a 1995 chevy
transmission to engine is 32ft lbs but is normaly tighten alot tighter you can't screw this up tighten really tight
SOURCE: Front Hub Bearing Torque specs to complete replacement
THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS
SOURCE: 92 chevy lumina 3.1 Torque convert lock and unlock
replace the TCC solenoid, if that doesn't fix it you will need to replace the torque converter, it may be shorted
99 views
Usually answered in minutes!
×