SOURCE: Can't figure out how to change the bulb for turn signal on Jeep
I just changed both bulbs in my 1998 Grand Cherokee. These solutions made it possible, but i will offer some clarification and photos. First of all, all 4 screws are torx T20 as emoesmoe mentions, none are phillips. there are two bulbs that blink: the larger amber bulb is the turn signal light--dealer was cheaper than autozone and only had to purchase one bulb; the other bulb is called a side marker and it also blinks with a turn but stays on with the headlights. see photos that go along with the first two solutions. the first photo shows step one the first screw to take out. second and third photo are step two removing the second screw. the last photo shows the exposed screws to the turn signal housing after the uper light houseing has been removed:
SOURCE: How do you change the 2007 Jeep Patriot turn
You might have to remove the headlamp assy to get to it.
SOURCE: what is the fuse location for a 2007 jeep compass,
there is no turn signal fuse it is integrated with the fuse module.
SOURCE: remove 2007 jeep compass bumper cover
Hello, I can assist you. Begin by rounding up the necessary tools:
7mm socket and ratchet
7mm wrench
10mm socket
screw driver or panel removal tool (for push rivets)
Now go to the following site and take a look at the step by step instructions and pictures which does a nice job of explaining this entire job. Thanks for using Fixya!
http://www.jeeppatriot.com/forum/showthread.php?t=6291
SOURCE: 2007 Jeep Compass..front and rear
my driverside headlight stopped working, the bright will work but not the dim. fuses and power was good, do you think it could be same solution to my prob?
561 views
Usually answered in minutes!
×