SOURCE: Does the 2003 Toyota Corolla Z1 motor have a timing belt or chain
I don't believe it has a belt !!!!!!!!!!!!!!!!
The one I have 2003 Toyota Corolla has timing chain.
And I think all 2003 Toyota Corolla have timing chains.
So don't let them ( workshops) lie to you.
You can browse the internet to see if yours has a timing belt or timing chain?
Just put same question in the Google, yahoo, or about.com and search
they'll direct you to so money sites, which will show u if
yours has a timing belt or timing chain!
MAR
[email protected]
SOURCE: i have a 2004 corolla
me think you um not give enough information.
You changed the belt?
Just reset it to tdc and align the marks like you were doing it for the first time.
If it is off a degree it will run. It will not run good.
Replace the tensioners when this done yes.
Align marks and reinstall.
SOURCE: replacing timing chain 2000 corolla 1,8 eng
!!! Check first if engine valves are not bended !!!
The timing chain diagram & procedures for 2000 Toyota Corrola 1.8 engine:
Special tools:
1. Crankshaft pulley holder - Tool No. 09213-70010/11.
2. Crankshaft pulley puller - Tool No. 09950-50012.
General precautions:
1. Disconnect battery earth lead.
2. Remove spark plugs to ease turning engine.
3. Turn engine in normal direction of rotation.
4. Observe tightening torques in pictures below.
5. Do NOT turn crankshaft via camshaft or other sprockets.
6. Do NOT turn crankshaft or camshaft with timing chain removed.
7. Mark position of crankshaft position (CKP) sensor before removal.
Valve timing procedures:
1. Ensure crankshaft pulley and timing chain cover TDC marks aligned [1].
2. Ensure teeth timing mark on each camshaft sprocket aligned.
3. 1ZZ-FE/3ZZ-FE/4ZZ-FE [2].
4. 2ZZ-GE [12] OR [13].
5. If not, turn crankshaft pulley 360 degrees.
6. Remove chain tensioner, tensioner rail and chain guide.
7. Check chain for wear.
7,248 views
Usually answered in minutes!
×