SOURCE: vacuum line diagram
if you get a chilton from any local parts store it should have them in there
SOURCE: 1997 suburban vacuum line schematic
Available at dealer on request, sometimes posted on hood
SOURCE: I need a vacuum line schematic for a 2003 chevy
Replace the complete heater control vacuum line over the motor with rubber vacuum tubing.
The heater vacuum line connects on the drivers side of the engine halfway back on the intake manifold.Run the new line to the heater vac connection at the passenger side at the right front in the engine compartment.
I change 2 a week....this should be where your problem is.
Testimonial: "That took care of it. I did change from that small vacuum line to the large rubber and ran it up to a wire loom overhead so as not to get as hot."
SOURCE: I need the fan belt
Hopefully this diagram will help. As for the belt sizes, I would suggest using a thick nylon rope routed around the pulleys and then measuring the length. When purchasing the belts enquire as to the store's exchange policy in case you get it wrong.
Fig. 33: Vacuum circuits - 1984 V8 4.1L engine Calif. (DFI)
Hope helps. Just keep in mind that your feedback is important
and I'll appreciate your time and consideration if you leave some
testimonial comment. Have a nice weekend and thanks for using FixYa.
Jose.
167 views
Usually answered in minutes!
×